| The flux arrived early, as well as some cheap helping hands. I used wire instead of blobs and actually repaired the traces instead of the in between this time. The wires are made out of a torn up desoldering wick, and I used an insulated cable below because I accidentally ripped part of the trace off. Using flux is amazing, everything just starts sticking to where it needs to go (the wires spontaniously allign). I cleaned everything with some vodka afterwards. All buttons on the drone controller work again :) submitted by /u/Doughnut_Opposite [link] [comments] |
NUBURU Inc of Centennial, CO, USA — which conducts research, development, design and manufacturing of high-power, high-brightness industrial blue lasers — has increased the power of its BL product line from 250W to 1000W by introducing its next-generation BL-1000-F. The additional power enables higher-speed, micron-level precision and repeatable high-quality welds, all of which are critical attributes for the needs of large commercial markets including electric vehicle (EV) battery welding and 3D printing...
Silvaco Group Inc of Santa Clara, CA, USA (which provides electronic design automation software and semiconductor design IP for process and device development) says that South Korea’s SK Powertech (which was founded in 2017, and became a part of SK Group in May 2022) has adopted its Victory TCAD (technology computer-aided design) solution for power devices to accelerate R&D of its silicon carbide (SiC) power devices. The Victory TCAD solution is said to enable SK Powertech to achieve significant improvements in its power management technology...
The UK Space Agency, in partnership with ADS, has awarded IceMOS Technology (a provider of superjunction MOSFETs, MEMS solutions and advanced engineering substrates) part of £300,000 in funding for a project to further develop a new breed of power transistors for space applications through the Space Technology Exploitation Programme (STEP). The IceMOS manufacturing center of excellence in Belfast, Northern Ireland, is one of only three companies selected to accelerate development in UK space exploration and supply chains...
Analog/digital (mixed-signal) integrated circuit, micro-electro-mechanical system (MEMS) and specialty semiconductor foundry X-FAB Silicon Foundries SE of Tessenderlo, Belgium is spearheading a strategic initiative aiming to enable the European semiconductor and photonics industries to gain greater sovereignty, strengthening the continent’s manufacturing capabilities in key emerging areas. The photonixFAB project aims to empower photonics innovation by small- and medium-sized enterprises (SMEs) and large entities by providing low-barrier access to both low-loss silicon nitride (SiN)- and silicon-on-insulator (SOI)-based photonics platforms with indium phosphide (InP) and lithium niobate-on-insulator (LNO) heterogenous integration capabilities...
Cadmium telluride (CdTe) thin-film photovoltaic (PV) module maker First Solar Inc of Tempe, AZ, USA has announced a limited production run of what it says is the first bifacial solar panel utilizing a thin-film semiconductor. A fully functional pre-commercial Series 6 Plus Bifacial PV module is making its industry debut at Intersolar Europe in Munich, Germany, where it is on display at First Solar’s booth #520 in Hall A1 (14–17 June)...
Murata company pSemi Corp of San Diego, CA, USA – a fabless provider of radio-frequency integrated circuits (RFICs) based on silicon-on-insulator (SOI) – has announced two multi-chip modules featuring dual-channel switches. The PE53230 for 3.3–3.8GHz and the PE53231 for 3.5–4.0GHz each contain two switches and two LNAs for high- and low-band frequencies. The new module portfolio is said to deliver the industry’s lowest noise figure, at less than 1dB, enabling best-in-class receiver sensitivity and performance while handling 20W average input power, enabling removal of external circuitry...
Murata company pSemi Corp of San Diego, CA, USA – a fabless provider of radio-frequency integrated circuits (RFICs) based on silicon-on-insulator (SOI) – has unveiled its latest single-pole four-throw (SP4T) switches with broadband frequency coverage up to 8GHz. The PE42445 high-isolation 3mm x 3mm package and the PE42446 high-isolation 4mm x 4mm package switches deliver high linearity and what is claimed to be best-in-class isolation performance, essential in 5G base stations...
Milestones have been announced in the joint development program between Intelligent Epitaxy Technology Inc (IntelliEPI) of Richardson, TX, USA – which manufactures MBE-grown epitaxial wafers – and Riber S.A. of Bezons, France – which makes molecular beam epitaxy (MBE) systems as well as evaporation sources – regarding qualification of the latter’s new MBE 8000 production platform...
POET Technologies Inc of Toronto, Ontario, Canada — designer and developer of the POET Optical Interposer, photonic integrated circuits (PICs) and light sources for the data-center, telecom and artificial intelligence (AI) markets — has announced alpha sample readiness of POET Infinity, a chiplet-based transmitter platform for 400G, 800G and 1.6T pluggable transceivers and co-packaged optics solutions. Two lead customers have agreed to partner with POET to test the alpha version...
Lumentum Holdings Inc of San Jose, CA, USA (which designs and makes optical and photonic products for optical networks and lasers for industrial and consumer markets) has announced the pricing of its offering of $525m worth of convertible senior notes due 2029 in a private placement to qualified institutional buyers (pursuant to Rule 144A under the Securities Act of 1933, as amended)...
WIN Semiconductors Corp of Taoyuan City, Taiwan – which provides pure-play gallium arsenide (GaAs) and gallium nitride (GaN) wafer foundry services for the wireless, infrastructure, and networking markets – has announced the commercial release of its PQG3-0C next-generation integrated millimeter-wave (mmWave) GaAs platform...
For coverage of all the key business and technology developments in compound semiconductors and advanced silicon materials and devices over the last month, subscribe to Semiconductor Today magazine...
TRUMPF Photonic Components GmbH of Ulm, Germany (part of the TRUMPF Group) – which makes vertical-cavity surface-emitting lasers (VCSELs) and photodiodes for the consumer electronics, datacoms, industrial sensing, heating and automotive markets – is to have a new managing director as of 17 July. Dr Thomas Dobbertin will take over the role from Dr Berthold Schmidt, who will serve as chief technology officer (CTO) and member of the managing board for TRUMPF SE + Co KG as of 1 July...
Guerrilla RF Inc (GRF) of Greensboro, NC, USA — a provider of radio-frequency (RF) and microwave communication solutions for wireless OEMs — has released the GRF5526, GRF5526W, GRF5536 and GRF5536W, the latest in a series of ¼W linear power amplifiers. The indium gallium phosphide (InGaP) heterojunction bipolar transistor (HBT) amplifiers were designed specifically for 5G wireless infrastructure applications requiring exceptional native linearity over large 100MHz bandwidths and temperature extremes of –40°C to 105°C...
Teledyne e2v HiRel Electronics of Milpitas, CA, USA (part of the Teledyne Defense Electronics Group that provides solutions, sub-systems and components to the space, transportation, defense and industrial markets) has announced the availability of a pair of voltage-controlled oscillators (VCOs) with low-phase-noise performance for low earth orbit (LEO) space and other demanding applications...
Pages