Feed aggregator

A homemade robot powered by arduino submitted by /u/SocialRevenge [link] [comments]

NUBURU Inc of Centennial, CO, USA — which was founded in 2015 and develops and manufactures high-power industrial blue lasers — has increased the size of its board of directors from four to six with the appointment of Dario Barisoni and Shawn Taylor for a term expiring at the 2025 annual meeting of shareholders (or until a respective successor is duly elected and qualified). They will also each serve on the board’s Audit Committee...

Light detection & ranging (LiDAR) solution provider Voyant Photonics of Long Island City, NY, USA has announced the availability of the CARBON frequency-modulated continuous wave (FMCW) LiDAR sensor, featuring what is claimed to be the first truly effective and affordable LiDAR on a chip with solid-state beam steering...

The US Department of Energy (DOE) has announced $179m in funding for three Microelectronics Science Research Centers (MSRCs), which will perform basic research in microelectronics materials, device and system design, and manufacturing science to transform future microelectronics technologies...

The relentless pursuit of space exploration has always been a testament to humanity’s desire to push the boundaries of what’s possible. From the earliest satellite launches to interplanetary missions, the technological advances driving these achievements are nothing short of revolutionary. Among these, next-generation satellites and cutting-edge electronics are at the forefront, enabling unprecedented capabilities in communication, observation, and exploration.

The Evolution of Satellite Technology

The journey of satellite technology began in 1957 with the launch of Sputnik 1, a rudimentary metal sphere weighing just 83.6 kilograms. Since then, satellites have evolved from basic communication devices to complex systems that underpin modern society. Today’s satellites are miniature marvels, integrating advanced materials, AI-driven systems, and versatile designs to meet a myriad of demands.

• Miniaturization and Cost Reduction: With advancements in microelectronics and manufacturing techniques, the size and cost of satellites have drastically decreased. CubeSats and nanosatellites, often no larger than a shoebox, are increasingly common, democratizing space access for academic institutions, startups, and developing nations.
• Increased Functionality: Modern satellites boast multi-functional capabilities, combining Earth observation, weather monitoring, and communication tasks in a single platform.
• Enhanced Durability: New materials and radiation-resistant electronics extend satellite lifespans, reducing the frequency and cost of replacements.

Cutting-Edge Electronics in Space Exploration

The electronics onboard spacecraft are critical to their success, operating in extreme conditions of temperature, radiation, and vacuum. Next-generation electronic systems are pushing the boundaries of what’s feasible in these harsh environments.

• Radiation-Hardened Components: Space electronics are designed to withstand intense radiation and high-energy particles. Innovations in semiconductor manufacturing, such as gallium nitride (GaN) and silicon carbide (SiC) technologies, enhance performance while ensuring reliability.
• AI and Edge Computing: Artificial Intelligence (AI) empowers satellites to operate independently by analyzing data and making decisions on the fly, significantly reducing dependency on ground control
• Energy Efficiency: Power consumption is a critical factor in space. Advances in low-power processors and energy-harvesting technologies, like solar arrays and thermal converters, ensure sustainable operations.

Transformative Applications of Next-Gen Satellites

The advancements in satellite technology and electronics have unlocked transformative applications across industries and domains. Here are some key domains impacted:

• Global Connectivity: Initiatives like SpaceX’s Starlink and OneWeb aim to provide high-speed internet access to even the most remote areas, bridging the digital divide and fostering economic growth.
• Earth Observation: Satellites equipped with high-resolution cameras and advanced sensors are pivotal for environmental monitoring, disaster response, and agricultural optimization.
• Space-Based Navigation: Next-gen satellites improve the accuracy and reliability of Global Navigation Satellite Systems (GNSS), enhancing applications from autonomous vehicles to precision farming.
• Deep Space Missions: Advanced electronics enable missions to Mars, asteroids, and beyond, with improved data transmission rates, robust hardware, and autonomous systems to handle the challenges of interplanetary travel.

Latest Case Studies

Recent case studies highlight the real-world impact of next-gen satellites and electronics. For instance, the European Space Agency’s (ESA) Copernicus Sentinel program uses cutting-edge satellites to monitor climate change, providing invaluable data for policymakers worldwide. Similarly, NASA’s Perseverance rover, equipped with advanced electronic systems, has been exploring Mars, collecting samples, and sending high-definition images back to Earth. Another example is SpaceX’s Starlink constellation, which has successfully deployed over 5,000 satellites, revolutionizing global broadband connectivity and demonstrating the scalability of modern satellite networks.

Challenges and Innovations

Despite these advancements, the journey toward next-gen satellites and electronics is not without challenges. Addressing these hurdles requires innovative solutions and collaborative efforts.

• Thermal Management: Extreme temperatures in space necessitate effective thermal management systems. Novel materials and phase-change technologies are being developed to dissipate heat efficiently.
• Space Debris Mitigation: The proliferation of satellites increases the risk of collisions and debris generation. Technologies like satellite-servicing robots, deorbiting mechanisms, and enhanced tracking systems are crucial for sustainable space operations.
• Data Security: As satellites become integral to global infrastructure, they face growing cybersecurity threats. Implementing quantum encryption and blockchain technology can enhance security.
• Supply Chain Constraints: The demand for specialized components, coupled with geopolitical factors, poses challenges to satellite production. Investments in domestic manufacturing and diversified sourcing are essential.

The Role of AI and Machine Learning

AI and Machine Learning (ML) are revolutionizing how satellites operate and interact with their environments. From autonomous navigation to predictive maintenance, these technologies are key enablers of next-gen satellite capabilities.

• Autonomous Navigation: AI algorithms allow satellites to adjust their orbits and avoid collisions autonomously, ensuring operational continuity.
• Predictive Maintenance: ML models analyze telemetry data to predict and prevent system failures, extending satellite lifespans.
• Dynamic Tasking: AI enables satellites to prioritize tasks based on real-time data, optimizing resource utilization.

Collaboration and the Future

The development of next-generation satellites and electronics is a global endeavor, with governments, private companies, and academic institutions contributing to the effort. Collaborative initiatives like NASA’s Artemis program, ESA’s Earth Observation missions, and ISRO’s Chandrayaan projects exemplify the collective drive to explore space.

The private sector also plays a pivotal role. Companies like SpaceX, Blue Origin, and Rocket Lab are not only advancing satellite technology but also redefining space transportation and logistics. Meanwhile, electronics giants are investing heavily in research and development to create components tailored for space applications.

Conclusion

Next-generation satellites and electronics are the backbone of modern space exploration and utilization. They enable groundbreaking applications, from global connectivity to interplanetary missions, while addressing challenges with innovative solutions. As humanity continues to explore the cosmos, the synergy between satellite technology and advanced electronics will undoubtedly shape the future of space exploration and its benefits for life on Earth.

The post Exploring Space with Next-Gen Satellites and Electronics appeared first on ELE Times.

In recent years, human augmentation technology has transitioned from science fiction to an exciting frontier of innovation. Bridging the gap between electronics and biology, this emerging field holds the promise to enhance human capabilities, address disabilities, and redefine our relationship with technology. By integrating advanced electronics into the human body, researchers and engineers are unlocking unprecedented possibilities in healthcare, communication, and even daily life.

Understanding Human Augmentation

Human augmentation refers to the application of technology to enhance or restore physical, cognitive, and sensory abilities. These enhancements can be divided into three broad categories:

1. Physical Augmentation: Technologies that enhance physical strength, mobility, or endurance. Examples include exoskeletons and prosthetics.
2. Cognitive Augmentation: Tools that boost mental capabilities such as memory, problem-solving, and learning.
3. Sensory Augmentation: Devices that enhance or restore sensory perception, such as hearing aids, cochlear implants, or visual prostheses.

Key Technologies in Human Augmentation

1. Prosthetics and Bionics

Advanced prosthetics and bionic devices are redefining what it means to live with a disability. Prosthetic limbs equipped with sensors and actuators can replicate natural movements, while neural interfaces enable users to control these devices using brain signals. For instance, DARPA’s Brain-Machine Interface (BMI) program has developed prosthetics capable of providing tactile feedback, offering users a sense of touch.

2. Exoskeletons

Exoskeletons are wearable devices that augment strength and mobility. Used in industries such as healthcare, military, and manufacturing, these devices reduce physical strain and assist individuals with mobility impairments. Companies like Ekso Bionics and ReWalk Robotics are leading the way in commercializing exoskeleton technologies.

3. Brain-Computer Interfaces (BCIs)

BCIs establish direct communication between the brain and external devices. This technology is instrumental in restoring communication for individuals with severe paralysis. Neuralink, a company founded by Elon Musk, is pioneering BCIs that aim to treat neurological conditions and enable direct interaction with digital devices.

4. Sensory Augmentation Devices

Sensory augmentation focuses on restoring or enhancing sensory inputs. Cochlear implants, for example, have revolutionized hearing restoration, while retinal implants like the Argus II are helping individuals with certain types of blindness regain partial vision. Innovations in haptic feedback systems are also enabling users to experience touch in virtual and augmented reality environments.

5. Gene Editing and Bioengineering

Gene-editing technologies like CRISPR-Cas9 are paving the way for biological augmentation. By altering genetic codes, scientists aim to enhance immunity, improve cognitive functions, and even extend lifespan. Although still in its infancy, this area holds tremendous potential for preventive healthcare and personalized medicine.

Applications of Human Augmentation

Healthcare

Human augmentation is already transforming the healthcare sector. From robotic surgical systems that enhance precision to wearable devices monitoring real-time health metrics, technology is enabling proactive and personalized medical care. For individuals with disabilities, augmentation devices are restoring independence and improving quality of life.

Military and Defense

Exoskeletons and augmented reality systems are being developed to enhance soldier capabilities on the battlefield. Augmented soldiers equipped with heads-up displays and enhanced communication systems can process critical information faster, improving decision-making in high-stress environments.

Workplace Productivity

In industrial settings, exoskeletons reduce fatigue and injury among workers by assisting with heavy lifting and repetitive tasks. Cognitive augmentation tools, such as AI-driven analytics platforms, are enhancing decision-making and problem-solving in office environments.

Education and Learning

Augmented reality (AR) and virtual reality (VR) technologies are creating immersive learning experiences. Cognitive augmentation tools are also helping students with learning disabilities by providing tailored educational content and improving focus.

Entertainment and Gaming

Wearable devices and haptic feedback systems are enhancing the gaming experience, allowing players to interact with virtual environments in unprecedented ways. Sensory augmentation devices are also enabling more inclusive gaming for individuals with disabilities.

Challenges in Human Augmentation

While the potential of human augmentation is immense, the field faces several challenges:

Ethical Concerns

The integration of technology with human biology raises profound ethical questions. Should augmented individuals be given competitive advantages in education or the workplace? How do we ensure equitable access to these technologies?

Privacy and Security

Devices like BCIs and wearable health monitors collect sensitive data, making them potential targets for cyberattacks. Establishing robust security protocols and data privacy standards is essential to address these concerns.

Biocompatibility and Safety

Ensuring that augmentation devices are safe and compatible with the human body is critical. Long-term studies are necessary to assess the potential risks and side effects of implantable technologies.

Cost and Accessibility

Many human augmentation technologies are expensive, limiting their accessibility. Scaling production and developing cost-effective solutions will be vital to democratizing these innovations.

Future Directions in Human Augmentation

Advancements in AI and Machine Learning

AI is playing a pivotal role in enhancing human augmentation technologies. Machine learning algorithms are improving the functionality of prosthetics, enabling them to adapt to user behavior. AI-driven insights are also optimizing BCI systems and making real-time health monitoring more accurate.

Development of Soft Robotics

Soft robotics, which uses flexible materials, is revolutionizing wearable devices and prosthetics. These systems are more comfortable and better mimic natural movements, providing a seamless user experience.

Integration with 5G and IoT

The deployment of 5G networks and the Internet of Things (IoT) is facilitating seamless communication between augmentation devices and external systems. Real-time data exchange will enable faster decision-making and improved device functionality.

Focus on Sustainable Materials

To address environmental concerns, researchers are exploring sustainable and biodegradable materials for augmentation devices. These materials not only reduce ecological impact but also enhance biocompatibility.

Global Collaboration

Collaboration between governments, private sectors, and academic institutions is accelerating innovation in human augmentation. International partnerships are driving research, standardizing regulations, and ensuring ethical practices.

The Social Impact of Human Augmentation

Human augmentation has the potential to redefine societal norms. By addressing disabilities and enhancing abilities, these technologies can foster inclusivity and equity. However, they also risk widening social inequalities if access is limited to privileged groups. Balancing innovation with accessibility and ethical considerations will be crucial for harnessing the full potential of human augmentation.

Conclusion

Human augmentation technology represents a remarkable fusion of electronics and biology, pushing the boundaries of what humans can achieve. While challenges remain, ongoing advancements in AI, robotics, and biotechnology are paving the way for a future where augmented capabilities are an integral part of daily life. As we navigate this transformative era, fostering a collaborative, ethical, and inclusive approach will be key to ensuring these innovations benefit humanity as a whole.

The post Human Augmentation Tech: Bridging Electronics and Biology appeared first on ELE Times.

A dimmer switch is a versatile and practical device designed to adjust the brightness of lighting in a room. By regulating the amount of power delivered to a light bulb, dimmer switches offer users control over the ambiance and energy consumption of their spaces. These devices find extensive applications across homes, businesses, and industrial environments.

Types of Dimmer Switches

Dimmer switches are available in a variety of designs and technologies, each tailored to meet different requirements and compatible with various lighting setups:

1. Rotary Dimmer Switch:
– Operated by turning a knob to adjust brightness levels.
– Common in older installations and ideal for simple setups.

2. Slide Dimmer Switch:
– Features a sliding control to increase or decrease brightness.
– Allows for accurate control and is user-friendly.

3. Toggle Dimmer Switch:
– Combines a traditional on/off toggle with a small slider or dial for dimming.
– Merges functionality with a classic and enduring visual charm.

4. Touch Dimmer Switch:
– Adjusted by touching a panel or button.
– Often includes modern features like memory settings for preferred brightness levels.

5. Smart Dimmer Switch:
– Connects with smart home platforms and allows control through mobile apps or voice commands.
– Works seamlessly with smart devices such as Amazon Alexa, Google Assistant, and Apple HomeKit.

6. Universal Dimmer Switch:
– Compatible with different types of bulbs, such as incandescent, LED, and CFL.
– Ideal for versatile lighting setups.

How Does a Dimmer Switch Work?

Dimmer switches function by regulating the electrical current supplied to a light bulb, altering its intensity. The way a dimmer switch operates differs depending on its type and technology:

1. Incandescent Dimmers:
– Decrease the electrical voltage delivered to the bulb..
– Simple yet effective for traditional incandescent lights.

2. TRIAC Dimmers:
– Use a TRIAC (Triode for Alternating Current) semiconductor to control power delivery.
– Common in modern dimmers for compatibility with LEDs and CFLs.

3. Pulse Width Modulation (PWM):
– Found in advanced dimmers, especially for LED lights.
– Modulates the electrical signal by rapidly turning it on and off to adjust brightness without flickering.

4. Resistive Dimmers:
– Employ resistors to limit the electrical flow.
– Typically used in low-power or specialty applications.

Dimmer Switch Uses & Applications

Dimmer switches are widely used to enhance lighting environments and offer specific benefits across various settings:

1. Residential Spaces:
– Set a warm and inviting mood in spaces like living rooms, dining areas, and bedrooms.
– Enable mood lighting for special occasions or relaxation.

2. Commercial Settings:
– Adjust lighting in restaurants, hotels, and retail stores to suit customer preferences.
– Improve energy efficiency in offices by adapting light levels based on natural light.

3. Theatrical and Event Lighting:
– Offer accurate management of lighting for stage productions and event configurations.

4. Outdoor Applications:
– Control exterior lights, such as patio or garden lighting, to complement outdoor activities.

How to Use a Dimmer Switch

Using a dimmer switch is straightforward, but it’s essential to follow certain steps for optimal performance:

1. Choose the Right Dimmer:
– Ensure compatibility with your lighting system (e.g., LED-compatible dimmer for LED bulbs).

2. Installation:
– Ensure the power supply is completely switched off before beginning the installation process.
– Adhere to the provided installation guidelines or seek assistance from a qualified electrician.

3. Operation:
– Adjust brightness levels using the slider, knob, or touch interface.
– For smart dimmers, set up the device via the accompanying app for remote control.

4. Maintenance:
– Regularly clean the switch to maintain optimal functionality.
– Replace faulty dimmers to maintain lighting quality.

Advantages of Dimmer Switches

Dimmer switches offer several benefits, making them a popular choice for lighting control:

1. Energy Efficiency:
– Lower brightness levels reduce power consumption, leading to energy savings.

2. Extended Bulb Life:
– Reduced electrical flow minimizes stress on bulbs, increasing their lifespan.

3. Customizable Ambiance:
– Adjust lighting to suit activities like reading, relaxing, or entertaining.

4. Cost Savings:
– Energy savings and extended bulb life contribute to reduced utility and replacement costs.

5. Environmental Benefits:
– Reduced energy usage results in a smaller environmental impact and a lower carbon footprint.

6. Enhanced Aesthetics:
– Create visually appealing spaces with tailored lighting effects.

Common Challenges and Tips

While dimmer switches offer numerous benefits, they may present some challenges:

1. Compatibility Issues:
– Ensure compatibility between your bulbs and the dimmer to prevent flickering or suboptimal performance.

2. Installation Errors:
– Ensure proper wiring and follow guidelines to prevent malfunctions.

3. Noise:
– Some dimmers may produce a humming sound; selecting high-quality products can mitigate this issue.

4. Limited Dimming Range:
– Check the dimmer’s specifications for the range of brightness levels it supports.

Conclusion

Dimmer switches are essential for improving lighting management, boosting energy efficiency, and creating the desired atmosphere. With various types available, from simple rotary models to advanced smart dimmers, they cater to diverse needs and preferences. By understanding their functionality, applications, and benefits, you can effectively integrate dimmer switches into your spaces, transforming the way you experience lighting.

The post Dimmer Switch Meaning, Types, Working, Benefits & Applications appeared first on ELE Times.

Stealth technology, also known as low observable technology, is a sophisticated engineering method aimed at making objects less visible to radar, infrared, sonar, and other detection methods. Originally developed for military applications, stealth technology has significantly evolved, playing a critical role in modern warfare, security, and even civilian applications.

Types of Stealth Technology

Stealth technology encompasses various techniques and methods designed to evade detection across different spectrums. The primary types include:

Radar Stealth:
– Uses specially designed shapes and materials to reduce radar cross-section (RCS).
– Aircraft like the F-22 Raptor and B-2 Spirit are prime examples, designed with angular shapes to deflect radar signals.

Infrared Stealth:
– Focuses on reducing heat signatures emitted by engines and exhausts.
– Utilizes heat shields, special coatings, and exhaust cooling techniques.

Acoustic Stealth:
– Reduces noise generated by vehicles, particularly submarines and helicopters.
– Employs quiet engines, sound-dampening materials, and advanced propeller designs.

Visual Stealth:
– Involves camouflage and coatings to blend with surroundings.
– Advanced techniques include adaptive camouflage using digital displays or light-reflecting materials.

Electromagnetic Stealth:
– Reduces electromagnetic emissions from electronic systems to prevent detection or interception.

Sonar Stealth:
– Targets underwater applications by minimizing sound wave reflections.
– Submarines use anechoic coatings to absorb sound waves and avoid sonar detection.

How Does Stealth Technology Work?

Stealth technology operates on the principles of reflection, absorption, and emission minimization:

1. Shaping:
– Aircraft and vehicles are designed with sharp angles and curves that deflect radar waves away from the source.

2. Radar-Absorbent Materials (RAM):
– Specialized coatings and composites absorb radar waves, reducing reflected signals.

3. Heat Suppression:
– Thermal management systems dissipate or redirect heat emissions to minimize infrared detectability.

4. Soundproofing:
– Advanced insulation and quiet propulsion systems reduce acoustic signatures.

5. Signal Emission Control:
– Shielding electronic components limits electromagnetic leaks, ensuring stealthy operations.

Applications of Stealth Technology

Stealth technology has a wide range of applications, primarily in defense but increasingly in civilian sectors:

1. Military Aviation:
– Stealth fighters and bombers like the F-35 Lightning II and B-2 Spirit dominate airspace with their low radar detectability.

2. Naval Applications:
– Stealth ships and submarines employ sonar-absorbing materials and noise-reduction designs.

3. Missiles and Drones:
– Unmanned aerial vehicles (UAVs) and advanced missiles use stealth to penetrate enemy defenses.

4. Land Vehicles:
– Tanks and armored vehicles incorporate stealth coatings and designs for battlefield advantage.

5. Surveillance:
– Stealth drones and sensors are used in intelligence gathering, reconnaissance, and tracking operations.

6. Civilian Uses:
– Concepts like noise-reduction in transportation, such as electric vehicles, benefit from stealth principles.

Advantages of Stealth Technology

The advantages of stealth technology extend well beyond reducing visibility:

1. Operational Superiority:
– Allows forces to operate undetected, giving them a significant tactical advantage.

2. Survivability:
– Reduces the likelihood of detection and targeting by adversaries.

3. Precision Strikes:
– Enhances mission effectiveness by allowing stealthy penetration into hostile environments.

4. Versatility:
– Adaptable for various platforms, including aircraft, ships, submarines, and vehicles.

5. Enhanced Safety:
– Reduces collateral damage by enabling targeted operations.

Examples of Stealth Technology

Several iconic examples demonstrate the efficacy and evolution of stealth technology:

1. F-117 Nighthawk:
– The world’s first operational stealth aircraft, designed primarily for radar evasion.

2. B-2 Spirit Bomber:
– A long-range bomber with an all-wing design to minimize radar visibility.

3. F-22 Raptor:
– A fifth-generation fighter aircraft known for its radar-absorbing coatings and advanced stealth features.

4. Virginia-Class Submarine:
– Utilizes acoustic stealth to operate undetected in hostile waters.

5. Zumwalt-Class Destroyer:
– A stealth warship with angular designs and radar-absorbent materials.

6. RQ-170 Sentinel Drone:
– Known as the “Beast of Kandahar,” this UAV combines stealth and advanced surveillance capabilities.

Challenges and Limitations

While stealth technology provides numerous benefits, it also encounters significant challenges:

1. High Costs:
– Stealth platforms are expensive to design, build, and maintain.

2. Technological Countermeasures:
– Advanced detection methods, like low-frequency radar, challenge stealth capabilities.

3. Limited Payloads:
– To maintain stealth, platforms often compromise on weapon load and internal space.

4. Environmental Conditions:
– Factors like weather can impact the effectiveness of stealth features.

5. Energy Demand:
– Sophisticated stealth systems often require high energy, limiting their operational endurance.

Future of Stealth Technology

The future of stealth technology lies in adaptive and intelligent systems. Emerging trends include:

– Quantum Stealth: Advanced materials that bend light to make objects invisible.
– AI Integration: Autonomous systems capable of dynamic stealth adjustments.
– Hypersonic Applications: Developing stealth features for high-speed vehicles.
– Advanced Materials: Nano-coatings and metamaterials for enhanced stealth.

Conclusion

Stealth technology represents a pivotal advancement in modern engineering and defense. From radar evasion to acoustic stealth, its applications have reshaped military strategy and continue to influence various fields. As detection methods evolve, so too will stealth technologies, ensuring their relevance in a rapidly advancing technological landscape.

The post Stealth Technology Definition, Types, Working & Applications appeared first on ELE Times.

Graphics chip designer Imagination Technologies is up for grabs again. A Bloomberg report claims that Canyon Bridge Capital Partners, the private equity firm with ties to Chinese state investors, has hired Lazard Inc. to seek a buyer for the Hertfordshire, U.K.-based chip designer.

Imagination, once a promising graphics technology outfit, could never recover after the Apple fiasco and the perception of Chinese ownership. According to media reports, Apple, which owned an 8.1% stake in Imagination, considered buying the British chip designer in 2016. However, after failing to agree on Imagination’s valuation, Apple left the negotiating table and announced that it would start developing its own graphics IP.

Apple contributed to nearly half of Imagination’s sale, sending shock waves at the British chip company at that time. The company’s stock fell by 70%, and in 2017, Canyon Bridge, backed by state-owned China Reform, acquired Imagination for $686 million. Soon after, Imagination began shedding its non-core businesses; for instance, it sold its connectivity business Ensigma comprising Wi-Fi and Bluetooth silicon to Nordic Semiconductor.

Next came the issue of China gaining access to key semiconductor technology. The effort to appoint new board members and Imagination’s listing in Shanghai proved hot potatoes, leading to intervention from the U.K. regulators to ensure that Imagination remains a U.K.-headquartered business. The company has been in distress since then.

Figure 1 Imagination has more than 3,500 patents related to graphics and related technologies.

Its CEO, Simon Beresford-Wylie, has denied a recent Daily Telegraph report that he’s stepping down. He also rejected some reports about the company engaging in illicit transfers of technology to China. Earlier, in November 2023, Reuters reported that Imagination was laying off 20% of its staff.

With this backdrop, let’s go back to Imagination on the selling block. The Bloomberg report has named Alphabet Inc.’s Google, MediaTek, Renesas, and Texas Instruments as Imagination’s key clients. But no suitors have been reported in trade media yet.

Imagination owners are pinning their hopes on two major factors. First, they draw their hopes from Nvidia’s runaway success in the graphics realm. Though Nvidia’s GPUs are targeted at entirely different markets such as data centers and scientific computing. Imagination, on the other hand, mainly offers graphic solutions for lower-power markets such as automotive, PC cards, drones, robotics, and smartphones.

Second, like Nvidia, Imagination aims to bolster its standing by incorporating artificial intelligence (AI) content in its graphics IP offerings. The British chip firm plans to turn its graphics IP into AI accelerators for low-power training and inference applications.

Figure 2 Imagination is aiming to bring graphics-centric AI to battery-powered devices like drones and smartphones.

Imagination, founded in 1985, has come a long way in its 40-year long technology journey. Once seen as a jewel in Britain’s technology crown, it’s now facing the paradox of a struggling company with a highly promising technology. Perhaps its new owner could address that paradox and put the graphics design house in order.

Related Content

• Re-imagining Imagination Technologies
• Imagination’s RISC-V gambit reaches its next level
• Imagination Raises $100 Million Investment To Take On Edge AI
• GPU specialist Imagination to create 250 engineering jobs in 2022
• Imagination Sells Ensigma Wi-Fi Business to Nordic Semiconductor

The post Is Imagination Technologies for sale again? appeared first on EDN.

submitted by /u/ElectricGears [link] [comments]

submitted by /u/ZenoArrow [link] [comments]

submitted by /u/1Davide [link] [comments]

submitted by /u/Prestigious-Sky-4104 [link] [comments]

submitted by /u/1Davide [link] [comments]

submitted by /u/Mistrzunio21 [link] [comments]

submitted by /u/AutoModerator
[link] [comments]

submitted by /u/Crazy_Circuit_201 [link] [comments]

Made during challenge "12hours to 200kv". It's not safe, it's not wise but looks kind of cool. submitted by /u/Alexandria_Cinis [link] [comments]