Збирач потоків

Seica, Inc. is pleased to announce that BayaTronics, a leading technology, supply chain and manufacturing solutions provider, has expanded its advanced testing capabilities with the acquisition of the PILOT V8 NEXT. The system was recently installed in BayaTronics’ new state-of-the-art facility in Concord, NC.

This state-of-the-art flying probe test system reaffirms BayaTronics’ commitment to producing top-quality PCBs for critical applications across various industries.

The PILOT V8 NEXT delivers unmatched performance, speed and flexibility. Its vertical architecture allows for simultaneous probing on both sides of the Unit Under Test (UUT), optimizing efficiency and ensuring precise test results. This dual-sided probing capability significantly enhances productivity while maintaining the high testing standards required for today’s advanced electronics manufacturing.

“At BayaTronics, we produce top-quality PCBs for critical applications,” said Dirk Warriner, CEO of BayaTronics. “Seica’s state-of-the-art flying probe test system enhances our testing processes, ensuring superior accuracy and efficiency, which is critical for the success of our customers’ products.”

As a trusted partner for domestic customers, BayaTronics provides high-volume, cost-competitive solutions without compromising on quality. The company specializes in printed circuit board assembly (PCBA), final assembly, and material management, offering comprehensive support for end-to-end supply chain requirements. By assisting customers with design for manufacturability, new product introduction, and material procurement, BayaTronics helps optimize costs and streamline production processes.

BayaTronics’ acquisition of the PILOT V8 NEXT reinforces its leadership in advanced manufacturing solutions, enhancing its capacity to deliver precision and efficiency to meet customer needs.

The post BayaTronics Expands Testing Capabilities with Seica Pilot V8 NEXT Flying Probe System appeared first on ELE Times.

The Light Sensor Market has been experiencing significant growth in recent years, driven by technological advancements, a rise in smart devices, and increasing demand across various industries such as automotive, consumer electronics, and healthcare. The market is projected to continue its upward trajectory, spurred by innovations that are enhancing the accuracy, efficiency, and functionality of light sensing technologies.

The Light Sensor Market is expected to surpass a valuation of US$ 4.8 billion by the close of 2032, maintaining a compound annual growth rate (CAGR) of 8.2% from 2022 to 2032. During this period, the market is projected to witness an absolute dollar opportunity of US$ 2.6 billion, driven by rising demand for light sensors across various industries.

As the world becomes increasingly connected, light sensors are poised to play a pivotal role in shaping the future of sensing technology, enabling smarter and more intuitive systems in our daily lives.

One of the most notable trends in the Light Sensor Market is the integration of these sensors into a broad range of devices and applications. The automotive industry, for example, has embraced light sensors to enhance vehicle safety and functionality. Adaptive headlights, which adjust the direction and range of a car’s headlights based on the surrounding light conditions, are just one application that relies heavily on light sensors. This innovation improves driving safety by optimizing visibility in changing environmental conditions, such as fog, rain, or low-light scenarios.

Another significant trend is the growth of smart homes and buildings. The increasing adoption of Internet of Things (IoT)-enabled devices has driven the demand for light sensors to automate lighting control systems. These sensors detect ambient light levels and adjust lighting accordingly, offering energy efficiency and cost savings. According to Persistence Market Research, sensors that enable features like automated window shading and intelligent daylight harvesting are becoming more prevalent, ensuring that buildings maintain optimal lighting conditions without wasting energy.

Technological advancements have significantly improved the performance and versatility of light sensors. One of the most impactful developments has been the integration of multiple sensing capabilities into a single sensor unit. This multi-sensor approach allows for more complex and precise measurements, providing valuable data for applications such as smart cities and industrial automation. These sensors can now detect not only light intensity but also color temperature, UV exposure, and even proximity, making them highly adaptable for a variety of use cases.

Miniaturization of sensors is another innovation that is transforming the market. As devices continue to get smaller and more portable, the demand for compact, efficient light sensors has surged. The advancement of microelectromechanical systems (MEMS) technology has been a key enabler of this miniaturization. MEMS-based light sensors offer improved accuracy and sensitivity while maintaining a small footprint, making them ideal for applications in wearables, smartphones, and other consumer electronics.

The increasing adoption of smart devices and automation systems is a key driver of the Light Sensor Market. As consumers demand more intelligent and energy-efficient products, manufacturers are incorporating light sensors into a wide range of devices, from home appliances to health monitoring systems. The automotive sector, too, is capitalizing on these advancements, particularly in the development of autonomous vehicles, where light sensors are integral to providing real-time data for navigation and environmental awareness.

Furthermore, the rise of energy-conscious consumers has created a robust market for light sensors in energy management applications. By enabling more efficient lighting control, light sensors are helping to reduce energy consumption in both residential and commercial settings. This trend is particularly relevant in the context of global sustainability efforts, where energy efficiency and conservation are top priorities.

The healthcare industry is also a growing source of demand for light sensors. These sensors are being used in medical devices that monitor patients’ health conditions, such as pulse oximeters that measure blood oxygen levels through light absorption. As healthcare becomes more personalized and technology-driven, the role of light sensors in patient care and monitoring is expected to expand significantly.

While the Light Sensor Market presents vast opportunities, it is not without its challenges. One of the key obstacles is the high cost associated with advanced light sensor technologies. Although the miniaturization and increased efficiency of these sensors have made them more affordable, the initial investment in cutting-edge solutions can still be a barrier for smaller businesses or emerging markets.

Another challenge is the need for greater standardization across the industry. As the market continues to evolve, there is a pressing need for standardized protocols and communication systems to ensure seamless integration across various devices and applications. This will be essential for promoting widespread adoption and ensuring compatibility between different manufacturers’ products.

The Light Sensor Market is evolving at a rapid pace, driven by advancements in technology and the increasing integration of sensors into a wide range of industries. As smart devices, IoT, and automation continue to shape our world, the role of light sensors in providing real-time data and enabling intelligent systems will become more important than ever. With ongoing innovations and a growing focus on energy efficiency and sustainability, the future of light sensors looks bright, offering exciting opportunities for manufacturers, developers, and end-users alike.

The post Light Sensor Market Illuminating Trends and Innovations Shaping the Future of Sensing Technology appeared first on ELE Times.

Keysight Technologies, Inc. announced the Low-Power Double Data Rate 6 (LPDDR6) design and test solution, a complete design and test solution to support the next technology wave for memory systems. The solution significantly improves device and system validation, providing new test automation tools necessary for advancing AI, especially in mobile and edge devices.

The memory market is evolving due to the rising demand for high-performance computing, AI, and energy-efficient mobile applications. LPDDR6 significantly enhances performance and efficiency to support next-generation compute system requirements, making it a crucial upgrade for contemporary devices.

Test complexity has grown with the adoption of next-generation memory devices such as LPDDR6, HBM4, and GDDR7. These technologies demand advanced test methods to ensure reliability and performance, and reducing test times while maintaining accuracy is a constant challenge.

Keysight’s complete workflow solution consists of transmitter and receiver test applications and the Advanced Design System (ADS) Memory Designer workflow solution. The LPDDR6 test solution can be paired with Keysight EDA software and the Keysight Memory Designer bundle to achieve faster design confidence from simulation to verification and test. The LPDDR6 test automation solution is based on Keysight’s UXR oscilloscope and high-performance M8040A Bit Error Ratio Tester.

LPDDR6’s impact is expected to reach beyond mobile devices. The new memory standard’s combination of high performance and power efficiency makes it particularly suitable for AI and machine learning applications, high-speed digital computing, automotive systems, data centers, and other edge applications areas where the balance between processing power and energy consumption is crucial.

• Reduce validation time with fully automated compliance testing and characterization
• Capture precise measurements quickly using industry-leading low-noise technology
• Debug design issues faster with streamlined data analysis tools
• Analyze device BER performance with extrapolated eye mask margin testing
• Achieve accurate signal measurements directly from BGA packages with specialized de-embedding capabilities

• Validate designs confidently using proven Bit Error Ratio testing methodology
• Pinpoint performance issues early by testing against multiple jitter, crosstalk, and noise scenarios
• Maximize signal integrity through detailed BER analysis and receiver equalization optimization
• Ensure high interoperability with both device and host controller validation

• Enable faster user experiences with higher data rates support
• Extend battery life and reduce power consumption in mobile and data center applications
• Build more reliable products with enhanced data integrity and system stability features

Dr. Joachim Peerlings, Vice President and General Manager, Network and Datacenter Solutions, Keysight, said: “As a leader in memory design and test solutions, Keysight continues to collaborate with JEDEC to develop the LPDDR6 standard. This new LPDDR6 standard is set to revolutionize the market, offering unprecedented speed, efficiency, and reliability, enabling the industry’s AI Edge rollout. As the deployment and use of next-generation memory devices are growing, Keysight has achieved a significant milestone in enabling faster time to market for LPDDR6 memory designs.”

The new receiver and transmitter solution will be shown to the public for the first time at DesignCon 2025, Jan 29-30, at booth number 1039 in Santa Clara, California.

The post Keysight Introduces Comprehensive LPDDR6 Solution for End-to-End Memory Design and Test Workflows appeared first on ELE Times.

The Low-Noise Chip-Scale Atomic Clock, model SA65-LN, enables frequency mixing for battery-powered devices

Developers need ultra-clean timing devices for aerospace and defense applications where size, weight, and power (SWaP) constraints are critical. A Chip-Scale Atomic Clock (CSAC) is an essential reference for these systems, providing the necessary precise and stable timing where traditional atomic clocks are too large or power-hungry and where other satellite-based references may be compromised. Microchip Technology today announces its second generation Low-Noise Chip-Scale Atomic Clock (LN-CSAC), model SA65-LN, in a lower profile height and designed to operate in a wider temperature range, enabling low phase noise and atomic clock stability in demanding conditions.

Microchip has developed its own Evacuated Miniature Crystal Oscillator (EMXO) technology and integrated it into a CSAC, enabling the model SA65-LN to offer a reduced profile height of less than ½ inch, while maintaining a power consumption of <295 mW. The new design is optimal for aerospace and defense mission-critical applications such as mobile radar, dismounted radios, dismounted IED jamming systems, autonomous sensor networks and unmanned vehicles due to its compact size, low power consumption and high precision. Operating within a wider temperature range of -40°C to +80°C, the new LN-CSAC is designed to maintain its frequency and phase stability in extreme conditions for enhanced reliability.

“A significant advancement in frequency technology, our next generation LN-CSAC provides exceptional stability and precision in a remarkably compact form,” said Randy Brudzinski, corporate vice president of Microchip’s frequency and time systems business unit. “This device enables our customers to achieve superior signal clarity and atomic-level accuracy, while also benefiting from reduced design complexity and lower power consumption.”

The LN-CSAC combines the benefits of a crystal oscillator and an atomic clock in a single compact device. The EMXO offers low-phase noise at 10 Hz < -120 dBc/Hz and Allan Deviation (ADEV) stability <1E-11 at a 1-second averaging time. The atomic clock provides initial accuracy of ±0.5 ppb, low frequency drift performance of <0.9 ppb/mo, and maximum temperature-induced errors of < ±0.3ppb. Together, the LN-CSAC can save board space, design time and overall power consumption compared to designs that feature two oscillators.

The crystal signal purity and low-phase noise of LN-CSAC are designed to ensure high-quality signal integrity, which is essential for frequency mixing. The atomic-level accuracy allows for longer intervals between calibrations, which can help extend mission durations and potentially reduce maintenance requirements.

Microchip’s products for aerospace and defense are designed to meet the stringent requirements of these markets, offering high reliability, precision and durability. The company’s solutions include microcontrollers (MCUs), microprocessors (MPUs), FPGAs, power management, memory, security and timing devices that ensure optimal performance in mission-critical applications such as avionics, radar systems, and secure communications. Visit Microchip’s aerospace and defense solutions web page for more information.

The post Microchip Launches the Next Generation of its Low-Noise Chip-Scale Atomic Clock Featuring a Lower Profile Height of Less Than ½ Inch appeared first on ELE Times.

Wearables, smartphones, tablets: In the consumer sector in particular, the demand for ever greater functionality, simplicity, and battery lifetime is increasing. Infineon Technologies AG contributes to these requirements with the introduction of the OPTIGA Connect Consumer OC1230. It is the world’s smallest GSMA-compliant and first 28 nm eSIM solution. OPTIGA Connect Consumer allows up to 50 percent less energy consumption compared to eSIMs on the market, extending the lifetime of the device’s battery without compromising on performance. It also contributes largely to more convenience since eSIMs can be managed remotely, making haptic SIM changes abundant thus saving time and resources and allowing for greater flexibility. Smartphone users can switch between different providers more easily, manufacturers can be more flexible in their design since physical access is not required. This can be a large advantage in IoT devices. Above all, OPTIGA Connect Consumer OC1230 is ideal for consumer devices such as smartphones, tablets, and notebooks, and even for small devices such as smartwatches and other wearables as well as 5G routers and POS payment terminals.

The OPTIGA Connect Consumer OC1230’s security architecture is based on Arm v8 and Infineon’s Integrity Guard 32 technology for increased performance and reduced power consumption. It enables a gain of 25 percent power/performance ratio compared to existing eSIMs on the market, thus extending the lifetime of the device’s battery. Remote SIM provisioning (RSP) and multiple enabled profiles (MEP) compliant with GSMA SGP.22 v3 enhance the end user experience. Users can download and store several mobile network operator profiles and remotely activate multiple profiles simultaneously.

With only 1.8 x 1.6 x 0.4 mm, the ultra-small chip-scale packaging reduces printed circuit board (PCB) space requirements by a factor of 37 relative to Nano SIMs and by a factor of 130 compared to standard SIMs. The OPTIGA Connect Consumer OC1230 is also available in X2QFN20 (3.0 x 3.0 x 0.3 mm) package. The eSIM solution features a large memory of 1 MB to accommodate multiple network operator profiles along with additional applications and user data.

OPTIGA Connect Consumer OC1230 is security evaluated according to BSI-CC-PP-0100-2018, specified in GSMA SGP.25 and is based on post-quantum-cryptography-(PQC) ready hardware.

The post The world’s smallest eSIM solution for mobile consumer devices: Infineon launches OPTIGA™ Connect Consumer OC1230 appeared first on ELE Times.