Feed aggregator

submitted by /u/CrudelisDeus [link] [comments]

Понад 20 тисяч заяв до КПІ! kpi вт, 07/28/2026 - 18:05

For fiscal fourth-quarter 2026 (ended 29 May), Aehr Test Systems of Fremont, CA, USA — which provides solutions for testing, burning-in and stabilizing semiconductor devices in wafer-level, singulated die, and packaged-part form — has reported greater-than-expected revenue of $18.8m, up 83% on $10.3m last quarter and 33% on $14.1m a year ago. Despite this, fiscal full year revenue of $50m for 2026 is still down on $59m for 2025...

Семінар "Якість без кордонів: інтернаціоналізація та транскордонне забезпечення якості у вищій освіті" KPI4U-2 вт, 07/28/2026 - 17:50

The global semiconductor industry is transitioning to the post-quantum cryptography (PQC) era. PQC is changing how digital systems defend against potential mathematical attacks. PQC algorithms are designed to protect against hackers who try to recover secret keys by breaking the underlying mathematics. However, physical hardware attacks can bypass mathematically secure algorithms, even if a PQC algorithm is perfectly implemented.

As organizations migrate to PQC, replacing the cryptographic assets being protected—PQC private keys, root keys, firmware signing keys—becomes costly and complex in deployed devices like automotive electronic control units (ECUs) and industrial or defense systems. When a chip processes post-quantum algorithms, it handles significantly larger key sizes and more complex mathematical operations than legacy cryptography.

This extended processing time and high computational intensity widen the vulnerability window, leaving the silicon exposed to physical tampering such as side-channel attacks (SCAs) and fault injection attacks (FIAs).

Mathematically upgrading to PQC only stops a hacker sitting at a quantum computer miles away. It does not stop a hacker from attempting physical attacks. This is where analog anti-tamper security IP comes into play. Analog sensors provide the first layer of defense to secure the silicon itself by detecting tampering techniques used in physical attacks, such as clock, voltage and temperature attacks, as well as electromagnetic and laser fault injection attacks.

Clock, voltage, and temperature attacks

A clock attack occurs when a hacker alters the incoming clock’s frequency or timing on a chip to cause glitches in an effort to interrupt normal operations and extract sensitive information. A clock attack monitor can be implemented to track the frequency and timing of the clock signal. If there is any unusual activity, an alert would be raised and preventive action taken.

A voltage glitch attack takes place when a hacker tries to tamper with the incoming power supply. Generating voltage drops or spikes can cause errors that impact encryption algorithms and bypass security procedures. A voltage glitch detector identifies when there is an unexpected change in voltage and sets off an alarm to reset or shutdown the system to protect against data loss.

A temperature or thermal attack involves a hacker quickly heating or cooling a device to generate timing or supply errors without having access to the clock signal or power supply. A temperature sensor can check for sudden temperature variations and then apply countermeasures if required.

Electromagnetic and laser fault injection attacks

An electromagnetic fault injection (EMFI) attack is when the hacker tampers with a device using an electromagnetic pulse, so no electrical contact or physical connection to the chip’s pins is required. An EMFI sensor can be integrated into the silicon to detect even small changes in the internal magnetic field on the device and respond swiftly to stop an attack from causing damage.

A laser fault injection (LFI) attack occurs when a laser beam is used by a hacker to induce errors to breach security and corrupt data. An LFI sensor is placed on a chip to monitor specific transient characteristics of a malicious laser pulse. If there are any indications of an attack, then the sensor can ensure that secret keys are erased or the device may be forced into lockdown mode.

PQC’s physical side

As PQC becomes more widely adopted, the frequency and complexity of physical hardware attacks are expected to rise. Whilst the latest cryptographic algorithms may resist quantum computers, hackers will continue to exploit physical vulnerabilities because without robust protection these are often easier than breaking the underlying mathematics.

This looks set to drive demand for analog anti-tamper IP that can detect clock, voltage, temperature, EMFI and LFI attacks, trigger responses such as key zeroization or secure reset if required, complement digital root of trust (RoT) solutions, and strengthen compliance with hardware security requirements in sectors such as automotive, industrial, financial and government.

Analog IP solutions offer a continuous line of defense, including clock, voltage, temperature and EMFI sensors, which complement digital RoT systems. As physical attack routes evolve, adding optical and LFI detection to the physical security envelope will become the benchmark for securing next-generation system-on-chips (SoCs).

While PQC addresses the security of cryptographic algorithms, analog anti-tamper IP protects the physical implementation of those algorithms. As organizations invest in PQC, safeguarding the hardware root of trust and stopping physical attacks becomes an even more critical part of a comprehensive security strategy.

Chris Morrison is VP of product marketing at Agile Analog.

Related Content

• Looming Quantum Threat as PQC Market Expands
• Post-quantum cryptography (PQC) knocks on MCU doors
• Post-Quantum Cryptography Incorporated into SoCs via eFPGA
• The need for post-quantum cryptography in the quantum decade
• Test and Measurement Strategies for QKD, PQC and Hybrid Systems

The post Why analog anti-tamper security IP is crucial in the PQC era appeared first on EDN.

Expensive shortwave radios include beat frequency oscillators, so why not also add one to an inexpensive radio version?

Broadcast shortwave (SW) radio use may be declining, but there are still lots of interesting signals to listen to between 1.6 and 30 MHz, such as amateur radio (Reference 1), pirate radio stations (Reference 2), aeronautical weather reports (Reference 3) and long-distance aircraft communications (Reference 4). Unfortunately most of these use Single Side Band (SSB) as opposed to the Amplitude Modulation (AM) used by broadcasters, which cannot be received on cheap domestic SW radios.

Wow the engineering world with your unique design: Design Ideas Submission Guide

AM consists of a radio frequency (RF) carrier wave (in red) which is partially modulated by the information – speech or music – (green), as shown in Figure 1a. The time domain signal in Figure 1a can alternatively be viewed in the frequency domain as in Figure 1b, where the carrier is surrounded by two smaller sidebands containing the information. A diode detector can demodulate this signal. In the time domain, the approach can be regarded as rectification with a low pass filter. In the frequency domain, the non-linear action of the diode mixes the carrier with the sidebands, therefore down-converting it back to an audio signal.

Figure 1 This sequence of images shows AM in the time  (a) and frequency domains (b), along with SSB in the frequency domain (c).

SSB lacks this carrier, with only one sideband as shown in Figure 1c. To demodulate SSB, an external carrier signal must be added; the resulting signal can then be demodulated with a diode detector like AM. This additional carrier is sometimes referred to as a Carrier Insertion Oscillator (CIO) or Beat Frequency Oscillator (BFO). Expensive SW radios include a BFO, so why not try and add one to a cheap one?

SSB demodulation

Many SW radios for SSB published in hobbyist magazines apply a high amplitude BFO signal to the input of the diode detector alongside the intermediate frequency (IF) signal, as shown in Figure 2a. The high BFO amplitude tends to overload any Automatic Gain Control (AGC) loop. Hence, in this type of receiver the AGC loop is disabled and the radio’s dynamic range is alternatively managed by manual RF and/or IF gain control.

Figure 2 These block diagrams show shortwave radios with BFO (a) and low-level BFO injection (b).

Adding a BFO to an existing radio in the way shown in Figure 2a would involve substantial modification to the radio to disable the AGC loop and integrate a manual RF gain control, if not already present. A second disadvantage with this technique is that because the IF signal has a large amplitude at the input of the detector, it can leak into the BFO and modulate it, therefore introducing distortion to the point of making the signal unintelligible.

The Eddystone EB35 radio from the late 1960s (Reference 5) overcame the leakage issue by injecting a low-amplitude BFO signal into the input of the IF amplifier chain. It does however still disable the AGC and instead rely on manual RF gain control.

Proposed here is a method of injecting the BFO at low amplitude into the input of the IF amplifier chain and controlling its level so as to best match the received signal when the existing AGC loop is operational, as shown in Figure 2b. The BFO with level control can be built into an external box with minimum modification, hence is easy to incorporate and then later remove from a valuable vintage radio receiver.

External BFO

The schematic of the BFO is shown in Figure 3. The oscillator is a Hartley type where a tap on transformer T1 provides the feedback. This is generally at 25% of the winding. T1 is a recycled IF transformer from an old transistor radio. Most low-cost radios like those shown in Figure 2 use an IF frequency between 455 and 470 kHz.

Figure 3 In this BFO schematic, VR1 is the pitch and VR2 is the level.

TR1 is a BC548 transistor, which although not known for its high frequency performance has sufficient gain at 455 kHz. The IF transformer includes a capacitor to set its operating frequency. To operate effectively as a BFO, the frequency needs are varied over a small range of a few kHz. This is achieved with a varactor diode D1, which here is half of a 1 A bridge rectifier (Reference 6) and controlled by VR1.

Level control is provided by VR2. The level of the carrier is reduced further by selecting a low values for C5 of 5pF. The values of C2 and C3 are not very critical, but past experience has shown that their optimum values are:

where fR is the operating frequency in MHz and C2 = C3 in pF. This is based on the optimum capacitor values for a Colpitts oscillator (Reference 7). The BFO is designed to run off 5V, so a voltage regulator (Reg1) is included. A 78L05 could be used, but in this application the radio used—a Realistic Patrolman SW60—had a 6 V supply, so a low-drop out K5050 regulator was used instead.

A photograph of the BFO built in a small plastic box and stuck to the back of the SW60 is shown in Figure 4. An additional hole is drilled in the box so that the core of T1 can be tuned. Although the SW60 is based on NPN transistors, it is a positive ground design, so the screen of the coaxial cable is connected to the input of Reg1 and the purple wire is ground. Another version was built for use with a WWII-era PCR radio where the cables passed through an unused headphone jack socket—requiring no modification to the case.

Figure 4 In this photograph of the BFO attached to the SW60, the top control is BFO level and off, the bottom is BFO pitch, and T1 is the metal can on the right.

Operation

When first used, the radio should be tuned between stations so only background white noise in heard. The BFO level control should be set to maximum. Doing this may cause a change in the sound of the noise. It is likely that the BFO will be operating outside of the IF bandwidth and will need to be tuning in.

Set the pitch control to approximately midpoint and with a trimmer tool, adjust the core of T1. As the BFO is tuned across the IF bandwidth, the general tone of the noise will drop and then increase on the other side. Generally, it should be adjusted so that the tone is at its lowest. Turning the pitch control should now cause the tone of the noise to rise on either side. At this point the level control can be backed off as it is probably driving the AGC loop. The optimum level control point is when the background noise is at maximum volume.

Tuning the radio to somewhere in the 7-7.3 MHz range in the late afternoon and evening should pull in stations in the 40-meter amateur band. If the signal sounds distorted, trying increasing the BFO level and the fidelity should improve. Adjusting the pitch control will of course affect the pitch of the received signal. When these two controls are correctly adjusted, the received signal fidelity is very good.

References

1. Amateur Radio bands: https://en.wikipedia.org/wiki/Amateur_radio_frequency_allocations
2. Shortwave Pirate Radio Stations: https://www.hfunderground.com/wiki/List_of_Pirate_Radio_Frequencies
3. VOLMET frequencies: https://dxinfocentre.com/volmet.htm
4. Aeronautical HF Radio: https://swling.com/blog/2015/09/aeronautical-hf-radio-map/
5. Eddystone EC10 Receiver: https://eddystoneusergroup.org.uk/Manuals/Eddystone%20EC10%20Manual.pdf
6. Rectifier diodes as varicaps (varactors): https://www.hanssummers.com/varicap/varicapdiode.html
7. NE602 Application note: https://www.scribd.com/document/46152488/Single-Chip-Frequency-Converter

Gavin Watkins is the founder of GapRF, a producer of online EDA tools focusing on the RF supply chain. When not doing that, he is happiest noodling around in his lab, working on audio electronics and RF projects, and restoring vintage equipment.

Related Content

• AM radio ‘flutter’
• Create radio receiver circuits with the LM386 audio amplifier
• Old vs. New Transistor Radio Exemplifies Advances

The post Add-on beat frequency oscillator (BFO) for shortwave radio appeared first on EDN.

Tessolve, a leading global provider of semiconductor system and silicon solutions for next-generation products, today announced that they have collaborated with Intel Foundry to support package designs with Embedded Multi-die Interconnect Bridge (EMIB), an advanced packaging technology essential for heterogeneous integrated multi-chip(let) architectures.

This collaboration enables Tessolve to support Intel Foundry customers globally. Tessolve has collaborated with Intel Foundry, supporting package design and completing a project end-to-end which includes package design and simulations. This allowed Tessolve to not only gain knowledge of the technology but also helped accelerate the qualification process.

“Over the past two decades, Tessolve has grown into a trusted engineering partner for many of the world’s leading semiconductor companies.”, said Srini Chinamilli, Co-Founder & CEO, Tessolve. “Intel Foundry’s EMIB, combined with our end-to-end capabilities across the semiconductor value chain, allows us to further expand our offerings for Intel Foundry customers.”

“Tessolve has already built deep capabilities over the past two decades, from chip architecture, design, test development and embedded systems”, said Vic Vadi, VP – Ecosystem, Foundry Services, Intel Corporation. “With this collaboration for enablement on our EMIB, we aim to combine Tessolve’s expertise with our advanced package design and test technology to provide our customers with end-to-end solutions to swiftly navigate the complexities of modern electronics design.”

EMIB is an advanced die-to-die connectivity technology developed by Intel and helps achieve low pitch bump with High Bandwidth Memory (HBM) integration and Universal Chiplet Interconnect Express (UCIe) interface compatibility. To meet the performance demands of next-gen semiconductor applications, open standards like UCIe help define interconnect protocols for chiplets. The collaboration aims to reduce development costs, mitigate risk, and accelerate innovation in semiconductor design.

As a leading engineering services player in the US$550 billion semiconductor market, Tessolve has made significant investments to build 11 semiconductor test and embedded labs across the globe to help enable a comprehensive solution offering to its clients. The company in September 2025 secured $150 million in funding from TPG, towards strengthening its global delivery centers, expanding advanced test labs and accelerating strategic acquisitions to consolidate its position as a key enabler to the global and Indian semiconductor ecosystem.

The post Tessolve and Intel Foundry Collaborate on Enablement for EMIB Advanced Packaging Technology appeared first on ELE Times.

For decades, the job of a camera or sensor was quite simple. A camera captured an image and a sensor measured distance, sending both pieces of information to a computer, which then studied it. Machines could record the information but didn’t truly understand it.

And this is about to change. Today, sensors are much more intelligent: Sensors have already begun to evolve from merely collecting data into an important part of the machinery’s intelligence. AI, edge AI, 3D sensing, computer vision, and Time-of-Flight (ToF) give machines a complete understanding of their environment, allowing them to react almost immediately. This is leading us into a new age of machines’ understanding of what we see. Machines are slowly learning to ‘see’, not just capture an image of what we see.

Think about a robot rolling around a busy warehouse, but instead of sticking to a set plan, it’s aware of an object in its way, how far off it is, and is able to change its direction. Imagine an intelligent office that knows someone is coming through the room without building a very detailed image of their face. Now imagine a factory environment where a machine has sensors and cameras that can see what’s in its environment and is capable of making a split decision to act. Smart sensing- now that’s a game-changing feature!

“Moving from AI in the cloud to AI in the physical world. A whole new category of smart sensors and other devices enables machines to notice, understand, and communicate with the physical world around them.” – Alexandre Balmefrezol, EVP, Imaging Sub-group, STMicroelectronics.

The Sensor Will Get a Brain Update

Old cameras are designed to take pictures of humans. Capture colourful images, improve image quality, and produce clearer videos. However, new cameras are designed for machines and AI, rather than for human beings.

STMicroelectronics’ camera sensors are geared more towards computer vision and AI than just transmitting pixels, according to its June 2026 imaging roadmap. The company touts low-power sensing, always-on sensing, high-quality identification, and tight integration into AI. This strategy places the sensors in industrial applications such as robots and automation, smart buildings, medical equipment, wearable devices, and smart glasses.

It is an important change. A camera operated by humans is programmed to show a perfect photograph. However, the job of a camera developed for a computing machine differs. It will be employed to allow a machine to detect movement of a body or object, perceive the environment, sense an object, or identify that something has changed in an image. In other words, the eye has moved up and become a part of the machine’s brain.

Bright Sense and Flight Sense: Towards More Intelligent Vision

According to an ST presentation from June 2026, the company has delivered more than 3 billion Time-of-Flight (ToF) sensors and is now making use of its specialised knowledge in sensing to pursue next-generation technologies. Its approach relies on sensing-, processing-, and system-level technologies, enabling it to deliver products for use in robots, smart buildings, and industrial automation. STMicroelectronics has been developing two major families of technology in this field: The Flight Sense portfolio and the Bright Sense portfolio.

Flight Sense: Time-of-Flight sensing that helps devices with distance and depth. Bright Sense: Image sensor, focusing on computer vision, AI, and low-power use cases. This is powerful because more often than not a machine needs to know that you are showing it a photograph, rather than something just in front of it, that it needs to understand where in this image a photograph lies and indeed, which photograph you are in.

As an example, a factory robot might rely on a camera to recognize a box, but a combined depth sensor provides an even better understanding of how far away that box is. Using these combined technologies allows the robot to build a richer picture of its environment.

Bright Sense: For the Bright Sense product family, its technology and performance have been further enhanced. The pixel size has gone up from the conventional 3.2 microns to 2.6, 2.43, and even to the current 2.2 microns. ​With further technology development, especially 3D stacking technology, we can further reduce chip size, particularly at the module level and achieve greater performance leaps.

VL53L9: Providing Machines with Better Vision to See the World

The most exciting part mentioned in the new release material is likely the VL53L9 3D direct Time-of-Flight LiDAR module. The device can deliver detailed information about distance across 54 individual zones of detection, down to a distance of 9 metres and up to 100 frames per second (fps). Furthermore, the technology includes on-chip processing and supports low-power microcontrollers, suitable for use in small form-factor Edge AI applications.

So why is this important? Because robots and smart machines need to be able to sense the world. The VL53L9 offers infrared and depth sensing. The camera can use low-resolution Time of Flight (ToF) to provide meaningful data to an AI with some privacy considerations in place. This will also function in bright light and total darkness, and it may be able to see very thin items and close blind spots.

This could be helpful in the areas of robotics, factories, smart buildings, and security systems. It is also​ in development for use in AR and VR headsets, drones, healthcare, and smart farming, among other uses. At ST’s demonstration of the tech, it connected the VL53L9 with an STM32H5 microcontroller for checking safe areas, processing at 30 frames per second and requiring very small system memory. That’s big news for tiny gadgets. The less computing power you can use, the smaller you can make your device, the more efficiently you can power it, and the longer the battery life.

Edge AI: Thinking at The Source of the Data

Another major trend that comes together with intelligent sensors is Edge AI. Traditionally, a device may collect lots of data and send the information to the cloud for analysis. This method may take too much time and waste more network resources. The introduction of edge AI makes a change by performing the analysis closer to the sensor or device. Machines make the decision quicker.

ST’s new imaging material shows the transition towards sensors enabling on-board AI processing, intelligent features in devices closer to the edge, and the new family roadmap including designs that capture and process images at a sensor level to decrease overall system size, power, and computing needs. To an average user, this may not seem like a great improvement on a small piece of technology. However, to robots it could be the difference between going over obstacles and ploughing through them.

Always On but Don’t Always Have to Be Awake

There are other exciting things happening too, such as always-on sensors. One of the issues with using AI that runs all the time is the drain on power resources—especially on the limited resources of battery-powered devices like wearables, smart glasses, and easy-to-carry machines. ST’s new sensing design features ultralow power consumption and an auto-wake-up ability. With the sensor able to enter its ultra​-low-power mode, the system waits until something interesting happens to turn on the main system.

An auto-wake-up scene change detection mode drawing just about 1mW was demonstrated in the June 2026 presentations. It’s like a security guard that isn’t alert at all times, but that immediately jolts awake when something’s off. Perhaps the battery can last longer if it still gives the fastest response on devices. Applications can range anywhere from smart glasses, home devices, medicine applications, and security systems to barcode scanning.

Robots Seem to Finally Get Their Eyes

There’s no field that’s arguably receiving a bigger benefit from the sensing revolution than robotics. A robot needs good perception, or else it’s almost as good as any other robot out there that is just strong and fast, but also blind to what is going on around. It won’t be safe to run those robots in an unknown environment with just brute force.

ST demonstration image sensors enable “eyes” for machines such as robots in the industrial or humanoid world, robot packaging, logistics, and even for flying robots. ST also emphasizes computer vision to enable machines to make sense of their surroundings.

Now here is where the really fun stuff happens. “The robots of the future will increasingly look like our own visual system, sensing and reacting to their environment,” says Calkins. “They won’t necessarily just be executing the same program over and over again; their eyes will give them understanding and allow them to react to unexpected events.”

Robots could spot a human being on the move in a warehouse. A factory robot may identify an item in front of it. A drone can have a better sense of its environment. If humanoid robots have vision and depth capability, they could interact with the physical world. The more accurately machines can perceive their environment, the more “intelligent” they can behave.

Privacy: Being Observed but Unidentified

Another massive advantage that comes with smart depth sensing is privacy. Not all applications require a high-res image of a human face; in some applications, the system needs to determine whether somebody is present, if they have fallen, or how many people there are.

The new VL53L9 material demonstrates low-resolution Time-of-Flight (ToF) sensing with privacy awareness. The system can obtain helpful depth and motion data while still being less personal on visual information than an actual camera. This could be particularly useful in hospitals, offices, and in the smart home, as well as retail surroundings.

For example, a fall detection system for elder care might not need to identify a person’s face. This could bring intelligent sensing not just closer to home, but to personal spaces too.

Future Machines That Will Sense Their Surroundings

The technology we are being treated to in the newest ST report indicates an imaging future much broader than just pretty pictures. The attention turns to machine vision, AI, depth sensing, low-power computing and real-time perception. The company’s portfolio includes the new low-power and 5-megapixel Bright Sense sensors targeting edge AI, wearables and industrial automation. Its Flight Sense technology delivers 3D sensing to the edge for a number of uses ranging from robots to smart buildings.

It’s part of a much larger technology trend. AI isn’t confined to your computer screen anymore; it’s becoming a physical part of the physical world around us. In robotics, drones, smart machines, vehicles, or the large number of interconnected gadgets and gizmos out there, it’s important for something to know the difference between the road and your living room before they do something smart (or frankly, dangerous). And that’s why intelligent sensors are becoming so valuable. The biggest revolution of all might be that machines can at last see. And this is where the real revolution is- they are starting to understand what it is that they see.

As the power of Edge AI grows and sensors are becoming smaller, smarter, and more energy efficient, the devices around us may soon have the capability to detect the changes around them, understand them, and react to them in the right way. Perhaps the future of AI won’t involve only smarter software. It would also depend on providing machines with appropriate vision, appropriate senses, and the ability to understand the world around them.

The post From Seeing to Perceiving: How STMicroelectronics is Teaching Machines a New Sense of Perception appeared first on ELE Times.

Lumentum Holdings Inc of San Jose, CA, USA (which designs and makes photonic products for optical networks and lasers for industrial and consumer markets) says that president & CEO Michael Hurlston has been selected to receive the 2026 Optica i4 Individual Achievement Prize, recognizing his leadership and contributions to the global optics and photonics industry. The award is being presented on 24 September during the Global Photonics Economic Forum 2026 in Málaga, Spain...

Keysight Technologies, Inc. today announced certification of its RFPro electromagnetic (EM) design software, part of the Keysight EDA Advanced Design System (ADS), for Intel 14A and Intel 18A-P process technologies. The certification gives radio frequency integrated circuit (RFIC) and mixed-signal designers confidence that their electromagnetic simulations accurately reflect Intel Foundry’s latest manufacturing processes before chips move to production.

As semiconductor manufacturers introduce increasingly advanced process technologies, design teams face growing pressure to shorten development cycles while avoiding costly design errors. Certified simulation software enables engineers to identify and resolve performance issues before manufacturing begins, helping reduce development risk, avoid expensive chip redesigns and accelerate time to market.

A mismatch between EM and circuit behavior that surfaces only after tape-out means an expensive re-spin, so simulation tools must be validated on a node before design work begins. Keysight’s certification gives teams that path as Intel Foundry delivers on its roadmap from Intel 18A into 18A-P and Intel 14A, which introduces RibbonFET 2 and PowerDirect, its new transistor and power delivery architectures.

This certification builds on Keysight’s ongoing collaboration with Intel Foundry, including support for Intel 18A and EMIB-T advanced packaging technology. Together, these capabilities provide customers with consistent design flows across multiple Intel process generations, supporting applications ranging from AI and high-performance computing to mobile devices.

Shawn Han, Senior Vice President and General Manager, Foundry Services, Intel Corporation, said: “As our customers look to address next-generation demands through differentiated solutions, Intel Foundry believes predictable execution on our advanced process and packaging technologies will accelerate their innovation,” “By collaborating closely with ecosystem partners such as Keysight to certify world-class solutions, we are providing our customers with greater confidence they can achieve their power, performance and efficiency goals and get to market more quickly.”

Niels Faché, Senior Vice President, Keysight Design Engineering Software, said: “Design teams can’t wait for a new process node to mature before they trust their simulation results. This certification means engineers can adopt Intel Foundry’s newest technologies early and get the silicon right the first time.”

The post Keysight Certifies Electromagnetic Design Software for Intel Foundry’s Latest Processes appeared first on ELE Times.

EDOM Technology, Asia’s best solutions provider, today announced an expanded collaboration with NVIDIA to help enterprises accelerate Edge AI adoption by integrating the NVIDIA Edge AI platform, open-source models, and system optimization technologies. The collaboration enables organizations to lower the barriers to deploying large AI models while reducing overall deployment costs.

As generative AI rapidly evolves from proof-of-concept to real-world applications, enterprise priorities are shifting. Rather than simply pursuing larger AI models, organizations are increasingly focused on running AI reliably on existing hardware platforms, accelerating deployment, and maximizing return on investment. Across industries from smart manufacturing and autonomous robotics to healthcare, Edge AI has become a key driver of digital transformation where efficient deployment is critical to successfully bringing AI projects into production.

The way enterprises adopt AI is also changing. Instead of building models from scratch, organizations are increasingly leveraging mature foundation models and open-source AI ecosystems to accelerate development, followed by application specific optimization and deployment. However, as AI models continue to grow in capability, several deployment challenges such as memory capacity, inference performance, and system integration have become major hurdles.

EDOM addresses these challenges by combining the NVIDIA Jetson platform with NVIDIA JetPack, NVIDIA CUDA, NVIDIA TensorRT, NVIDIA Jetson AI Lab, and leading open-source AI models and inference frameworks. The company delivers a comprehensive portfolio of services spanning platform selection, model integration, model quantization, memory optimization, and system validation. This end-to-end approach enables enterprises to maximize hardware resource utilization, reduce deployment costs, and shorten the journey from proof of concept (PoC) to production.

A notable example is NVIDIA Reachy Mini Jetson Assistant, which demonstrates how Headless Mode, NVIDIA Cosmos-Reason2 open VLMs, model quantization, and optimized inference frameworks enable multimodal AI workloads—including vison- language reasoning, Speech-to-Text (STT), and Text-to-Speech (TTS)—to run simultaneously on the NVIDIA Jetson Orin Nano 8GB platform. This showcases how software and system optimization can efficiently execute multiple AI models and reduce memory footprint on resource-constrained edge devices. Similar architectures are increasingly being adopted across smart manufacturing, autonomous robotics, and healthcare applications, supporting use cases such as production line inspection, intelligent vision systems, voice-enabled interaction, and autonomous decision-making. By performing AI inference directly on edge devices, organizations can achieve low-latency performance while enhancing data security and operational efficiency.

“Generative AI has entered the stage of real-world deployment,” said Jeffrey Yu, CEO of EDOM Technology. “Today, the biggest challenge for enterprises is no longer finding AI models; it’s successfully deploying AI into products and operational environments. The success of an AI project depends not only on hardware performance, but also on deployment efficiency, system integration capabilities, and overall return on investment. EDOM’s role extends beyond supplying platforms and components. We help customers integrate NVIDIA technologies, open-source AI models, and system optimization strategies to accelerate time-to-market, reduce deployment risks, and enable AI to deliver measurable business value.”

Backed by years of expertise in Edge AI and embedded system integration, EDOM provides end-to-end solutions encompassing selections powered by NVIDIA technologies, open-source AI models integration and application optimization, hardware design, and system deployment. The company has successfully enabled Edge AI applications across smart manufacturing, autonomous robotics, healthcare, smart retail, and smart city initiatives. Looking ahead, EDOM will continue collaborating with NVIDIA and the open-source AI community to help enterprises overcome the challenges of deploying large AI models, accelerate the transition from proof of concept to large-scale deployment, and transform AI innovation into tangible value across the industry value chain.

The post EDOM Accelerates Edge AI Deployment with NVIDIA Technologies appeared first on ELE Times.

​Uttar Pradesh has emerged as India’s leading electronics manufacturing hub, producing nearly 65% of the country’s mobile phones. Driven by strong investments, industry-friendly government policies, and the rapid expansion of manufacturing facilities, the state has become a major centre for electronics manufacturing and mobile phone production.

Since 2014, UP has been a hotspot for electronic manufacturers, including domestic and international ones to invest particularly in the Noida-Greater Noida-Yamuna Expressway corridor. Global big manufacturing smartphones, as also their component suppliers, have built huge manufacturing units in the area and put up a complete electronics manufacturing value chain. The state government says it accounts for roughly 65% of all mobile phones being manufactured in the country and is India’s biggest base for smartphone production.

Multiple efforts by both central and state governments have assisted the growth of the electronics sector in the state of Uttar Pradesh. At the national level, policies like the Production Linked Incentive (PLI) Scheme for large electronics manufacturing incentives; the setting up and scaling of production capacities in India, whereas the electronics manufacturing policy issued by the state offers supplemental incentives, enhanced infrastructure, and business ease reforms.

The proactive actions of the Uttar Pradesh government to streamline approvals, build an efficien​t logistics infrastructure, boost investor confidence, and encourage (foreign direct investment) FDI have positioned the state as a prominent investment destination for the global electronics sector.

While these efforts should result in significant acceleration of manufacturing and investment in UP, the state has a lot of work ahead of itself in achieving sustained future growth. Increasing domestic value addition; further ramping up production of semiconductors and components; creating an ecosystem of highly skilled personnel; and upgrading research and development to enhance in-house R&D is crucial for a long-term plan. To stay competitive globally, UP will also need to make priority investments, to ensure availability of dependable power supply, a world-class logistics system, and highly advanced manufacturing technologies.

The post Uttar Pradesh Emerges as India’s Biggest Electronics Hub, Producing 65% of the Nation’s Mobile Phones appeared first on ELE Times.

AI infrastructure is moving from server-scale acceleration to multi-rack supernodes that must behave like a single, highly available computer. Distributed optical circuit switching offers a practical way to extend scale-up fabrics with lower latency, lower power, flexible topology control, and limited disruption to existing data center architecture.

AI data centers are entering a phase where the hardest problem is not simply building a faster accelerator. It’s keeping thousands of accelerators fed, synchronized, and available as one machine. Training frontier models, serving long-context inference, and running agentic workloads all create a similar demand: more devices must communicate over longer distances without allowing the network to dominate cost, latency, power, or reliability.

That changes the definition of scale-up. It’s no longer only the set of links inside a server or rack. Increasingly, scale-up must span multiple racks while preserving the low-latency behavior programmers expect from a tightly coupled system.

Nvidia has framed the issue in similar terms, noting that as AI factories reach “extreme scale,” networking infrastructure “must be reinvented to keep pace.” The company’s recent silicon photonics announcements focus on exactly the metrics now becoming critical in AI infrastructure: power efficiency, signal integrity, resilience, and deployment speed.

That emphasis reflects a broader industry shift. The bottleneck is no longer just whether a link can move bits from one endpoint to another. It’s whether the entire fabric can support large, tightly synchronized accelerator domains while reducing power, limiting failure points, and remaining practical to deploy and service.

Copper has been the default for scale-up because it’s familiar, low latency, and economical at short reach, but physics is becoming less forgiving as per-lane data rates rise. Longer copper paths increase insertion loss and signal-integrity burden; thicker wires help the signal but work against density, airflow, and manufacturability.

Rack-scale cable trays become difficult to assemble and service, and a failure may require replacing large mechanical units rather than a small module. Retimers, equalization, and more complex board design can extend the life of copper, but they do not remove the underlying reach-density-power tradeoff.

Traditional pluggable optics solve part of this problem. They move data farther with less distance penalty than copper and are widely deployed in scale-out networks. But a scale-up fabric is different from a scale-out Ethernet fabric. Scale-up traffic often has stricter latency, synchronization, and collective-communication requirements, and in emerging architectures may carry memory-semantic traffic rather than ordinary packetized network traffic.

In that environment, the raw specifications of an optical link alone are not sufficient. The fabric also needs deterministic paths, fast reconfiguration, high serviceability, and smaller, more containable failure domains.

Figure 1 Next-generation scale-up and scale-out solutions extend the limits of traditional electrical interconnect and pluggable optical modules. Source: Lightelligence

Co-packaged optics (CPO) is an important long-term solution, but it’s not a simple drop-in replacement for today’s data center designs. Bringing optical engines into or near the package changes the thermal, packaging, manufacturing, serviceability, and qualification model. Recent industry discussions around CPO focus heavily on these operational issues: how to manufacture high-yield optical assemblies, make optical interfaces field-serviceable, and manage light sources and redundancy at scale.

Nvidia’s recent Spectrum-X Ethernet Photonics announcements also show where early CPO commercialization is gaining traction: scale-out and scale-across AI-factory networking. Scale-up CPO will follow, but it asks a different question: how do we preserve the behavior of a tightly coupled compute domain while changing the physical medium underneath it?

This is where distributed optical circuit switching, or dOCS, becomes important. Rather than concentrating the switching function in precious rack space, a dOCS architecture distributes compact silicon-photonic switching elements close to servers, GPU trays, or XPU clusters. This improves compute density by eliminating the switch chassis.

The goal is to keep data in the optical domain from port to port through the switch path, reducing unnecessary optical-electrical-optical conversions and avoiding the power and cost burden of very large centralized electrical switch ASICs. In practical terms, dOCS treats the scale-up network less like a fixed cable plant and more like a configurable optical fabric.

Figure 2 A distributed optical circuit switch (dOCS) integrates the optical interconnect and switching functions into one compact module. Source: Lightelligence

The distinction matters. A centralized switch can become expensive, power-intensive, and operationally painful as scale-up domains grow. It can also create a large failure domain. A distributed optical switch breaks the switching function into smaller modules, shrinking the blast radius of any one failure and enabling more granular service.

In one described implementation, the dOCS module integrates optical interconnect and optical circuit-switching functions in a compact module built around silicon photonics, controller, driver, and receiver circuitry. The architecture is intended to support millisecond-level failover, including substitution of a hot-standby GPU when a device fails.

For AI workloads, the value of that reconfigurability is not only resilience, it’s also topology control. Different phases of training and inference stress the fabric differently.

Dense all-reduce operations, mixture-of-experts routing, retrieval, key value (KV)-cache movement, and pipeline-parallel execution do not all benefit from the same topology. A circuit-switched optical layer can expose topologies such as ring, mesh, or dragonfly and allow the cluster manager to adjust the fabric according to specific workload-parallelism requirements.

Recent dOCS-based supernode work has described real-time topology reconfiguration and elastic expansion beyond 500 GPUs in a single logical domain. The broader architectural point is more important than the exact number: the network should become a schedulable resource, not a static constraint.

This also helps explain why dOCS is especially relevant to certain architectures. A supernode is not just a cluster with a marketing label. It is a tightly interconnected group of GPUs or other accelerators that attempts to behave like one large compute unit. In that context, effective model FLOPs utilization depends on how much time accelerators spend computing rather than waiting.

Optical scale-up links can extend reach across racks, while circuit switching can create predictable paths for high-volume collective traffic. The result is not simply more bandwidth on a datasheet; it’s a path to higher sustained utilization.

The same argument applies to memory. AI systems are increasingly constrained by memory capacity, memory bandwidth, and the location of memory relative to compute. High-bandwidth memory (HBM) on the accelerator remains essential, but it’s finite and expensive. Long-context inference and agentic workloads amplify the pressure by generating large KV caches and preserving more state across interactions.

CXL is important because it provides cache-coherent connectivity for processors, memory expansion, and accelerators, enabling resource sharing with lower software complexity. But coherent memory fabrics still need physical reach. Optical PCIe/CXL links and reconfigurable optical switching can help move memory from a stranded local resource toward a pooled resource available across boards, servers, and racks.

The practical advantage of dOCS is that it creates an intermediate deployment path. Data center operators do not need to redesign every server, change every protocol, or wait for full CPO maturity before gaining optical reach and switching flexibility in the scale-up domain. A dOCS-based fabric can be designed to remain protocol agnostic at the physical layer, supporting multiple higher-level fabrics while changing the transmission medium and switching mechanism underneath.

That matters because AI data centers are heterogeneous. They include GPUs, CPUs, XPUs, switches, storage, memory expansion devices, and management controllers sourced from multiple vendors and refreshed on different schedules.

Figure 3 As shown in this example, the dOCS architecture offers a practical advantage by creating an intermediate deployment path. Source: Lightelligence

A sensible roadmap is therefore not copper versus CPO, or pluggables versus CPO. It’s a staged migration. Linear pluggable optics can address immediate reach and power issues with limited architectural change. Distributed optical circuit switching can add fabric-level reconfiguration, availability, and scale-up reach.

Near-packaged optics can shorten electrical traces and improve density. CPO optics can eventually move optical I/O directly beside GPUs or switch ASICs for the highest bandwidth density and lowest electrical loss. Each step moves optics closer to the compute, but each step should also preserve serviceability and operational practicality.

The AI infrastructure industry is learning a familiar lesson from earlier computing transitions: the winning technology is rarely the one with the most elegant device physics alone. It’s the one that fits into systems, software, manufacturing, and operations at the right time.

The dOCS architecture fits that requirement because it attacks a real bottleneck now. It extends scale-up beyond the practical limits of copper, avoids inefficiencies of repeated electrical conversion, supports flexible accelerator-fabric topologies, and improves system uptime by localizing failures and rapidly rerouting traffic or switching to standby resources when hardware fails.

The future data center will almost certainly use several optical technologies at once: pluggable optics, linear drive optics, near-packaged optics, CPO, optical I/O chiplets, CXL-enabled memory fabrics, and optical circuit switches. The case for dOCS is that it gives operators a rapid-deploy scale-up option while the rest of the optical roadmap matures.

For AI infrastructure, that may be the most important kind of innovation: not a clean-sheet replacement for the data center, but a way to make the next supernode larger, more efficient, more available, and easier to deploy than the last one.

Maurice (Mo) Steinman is senior VP and U.S. GM at Lightelligence. He has enjoyed a 40-year career in the semiconductor industry, working for such companies as Digital, Compaq, HP, Intel and AMD, where he held the title of Senior Fellow before joining Lightelligence. Steinman has expertise in SoC architecture, SoC interconnect, memory subsystems, and energy management.

Related Content

• Optical switches primed for test debut
• The advent of co-packaged optics (CPO) in 2025
• Building Optical Control Planes: Challenges and Solutions
• Where co-packaged optics (CPO) technology stands in 2026
• Overcoming interconnect obstacles with co-packaged optics (CPO)

The post Rapid scale-up in data center: The case for distributed optical circuit switching appeared first on EDN.

​Global sales for semiconductor manufacturing equipment are expected to set another all-time record by 2028, hitting $229.5 billion. This is due to continued spending in artificial intelligence, leading-edge logic, advanced memory, high bandwidth memory (HBM), testing and advanced packaging. The findings are according to the latest forecasts from SEMI in its Mid-Year Total Semiconductor Equipment Forecast – OEM Perspective.

SEMI expects global semiconductor manufacturing equipment sales to rise 23.2% to $165.9 billion in 2026 and continue growing through 2028, marking five consecutive years of growth. The market is entering a new growth cycle, driven mainly by AI- related investment in semiconductor manufacturing and capital spending.

​​Demand for advanced logic chips and High Bandwidth Memory (HBM) is increasing as the use of AI and HBM-based technologies expands. These applications require increasingly advanced manufacturing processes and more complex chip designs.

According to market analysis, wafer fabrication equipment (WFE) is expected to remain the largest segment of the semiconductor equipment market. It includes machines used for wafer processing, mask and reticle production, and other front-end wafer fabrication processes.

SEMI’s Semiconductor Capital Equipment Market forecast expects equipment suppliers’ annual revenues to approach $100 billion by 2028. The forecast points to a longer period of capital investment as the industry works to address capacity constraints, supply shortages, supply-chain disruptions, and rising demand.

Growth will be driven mainly by artificial intelligence (AI), along with increasing investment in foundry and logic, DRAM, NAND, testing, and packaging. SEMI also highlights the important role of equipment manufacturers in expanding production capacity and developing technologies for future computing systems.

The post Global Semiconductor Equipment Sales Projected to Reach Record $229.5 Billion in 2028 appeared first on ELE Times.

Caliber Interconnects demonstrated its renewed focus on semiconductors and technology innovation at the IEEE International Test Conference (ITC) India 2026 through a host of technically rich sessions including a keynote presentation, tutorial, IEEE paper presentations, poster sessions, industry display showcase and panel discussions. The keynote titled ‘From Silicon Complexity to AI Revolution – India’s Silicon Leap 2047′ was delivered by Senthilkumar Dhamodharan, Vice President – Testing, Caliber Interconnects. The keynote, presented on ‘From Silicon Complexity to AI Revolution – India’s Silicon Leap 2047′, by Senthilkumar Dhamodharan, Vice President – Testing, Caliber Interconnects elucidated India’s ascension to global semiconductor status and the influence of AI on next-generation chip technologies.

The keynote examined the transformative role of Artificial Intelligence in reshaping the global semiconductor industry amid increasing silicon complexity, heterogeneous integration and advanced packaging technologies. It outlined how AI is revolutionizing every stage of the semiconductor lifecycle—from intelligent chip design automation and predictive manufacturing to AI-driven Automated Test Equipment (ATE), digital twins and advanced signal integrity analysis—helping improve product quality, accelerate time-to-market and enhance manufacturing efficiency. As Global demand accelerates semiconductors have become the foundation of digital economies, powering applications ranging from AI and autonomous systems to telecommunications, healthcare and defence.

The presentation also highlighted India’s growing strategic importance in the global semiconductor value chain. Drawing on the momentum created by the India Semiconductor Mission, emerging fabrication and advanced packaging initiatives, and the country’s globally recognised semiconductor design talent, the keynote presented a compelling roadmap for India’s evolution into a global hub for semiconductor design, manufacturing, testing and innovation.

Emphasising the vision of Viksit Bharat 2047, the address called upon industry leaders, researchers, policymakers, academia and the IEEE community to strengthen collaboration, develop indigenous test engineering capabilities, embrace AI-enabled validation methodologies and build a resilient, globally competitive semiconductor ecosystem.

Beyond the keynote, Caliber demonstrated its technical leadership by presenting one tutorial, four IEEE technical papers, four poster presentations, participating in an Industry Showcase and contributing to a high-level panel discussion. The company’s presentations focused on emerging challenges and innovations in AI- driven semiconductor testing, Design for-Test (DFT), Automatic Test Pattern Generation (ATPG), MBIST/LBIST, silicon debug, reliability testing, advanced-node devices, chiplets and AI accelerators.

IEEE ITC India 2026 served as an important platform for fostering industry-academia collaboration, promoting AI and machine learning applications in semiconductor test automation, yield improvement and test cost optimisation, while encouraging knowledge exchange among professionals, researchers and students.

Caliber’s exhibition booth attracted visitors, including semiconductor industry professionals, researchers, academicians and IEEE Fellows. The booth welcomed representatives from leading global technology companies including Texas Instruments, AMD, Qualcomm, Synopsys, NVIDIA, Broadcom, Marvell, SanDisk, Google, Siemens, Infineon, Teradyne, Advantest and Tessolve, alongside faculty and researchers from premier institutions such as IIT Patna, IIIT Kottayam, VIT Vellore, the University of Stuttgart, PSG College of Technology and several other universities. The interactions generated meaningful technical discussions and opened new avenues for research collaboration and industry partnerships.

Commenting on the event, Senthilkumar Dhamodharan said, “The future of semiconductors will be shaped by the convergence of AI, advanced testing and collaborative innovation. India has a unique opportunity to lead this transformation by combining its design excellence with world-class manufacturing, testing capabilities and a strong innovation ecosystem. IEEE ITC India provides an excellent platform to collectively build this vision for Viksit Bharat 2047.”

Caliber Interconnect’s strong participation at IEEE ITC India 2026 reflects the company’s continued focus on driving innovation in semiconductor testing, advancing AI-enabled engineering solutions and contributing to India’s emergence as a trusted global semiconductor technology leader.

The post Caliber Interconnects Showcases AI-Powered Semiconductor Testing at IEEE ITC India 2026 appeared first on ELE Times.

Photonic simulation CAD software developer Photon Design Ltd of Oxford, UK says that it has enabled pioneering, multi-junction vertical-cavity surface-emitting laser (VCSEL) simulation, within its HAROLD simulation tool...

The automotive industry has undergone a major transformation, shifting from traditional hardware-centric vehicles to software-defined vehicles (SDVs). Unlike conventional cars, SDVs continuously evolve through over-the-air (OTA) updates, unlocking new features, optimizing performance, and enhancing safety over time.

While this shift continues to enable greater connectivity, automation, and personalization, it also expands the cybersecurity threat landscape. As SDVs integrate with cloud systems, mobile apps, and AI-driven features, they become more vulnerable to cyberattacks. Ensuring robust security frameworks is critical to unlocking the full potential of SDVs while safeguarding user safety and data privacy.

What makes SDVs unique?

At the heart of SDVs is a shift in computing architecture. Traditional vehicles relied on multiple fixed-function electronic control units, but as software complexity grows, automakers are shifting toward zonal architectures. By dividing vehicles into manageable zones powered by system-on-chips, manufacturers can streamline software updates, optimize performance, and future-proof vehicle systems against obsolescence.

However, this software-driven transformation also creates security challenges. The sheer scale of SDV software is unprecedented: Traditional vehicles already contain about 100 million lines of code, and as fully autonomous Level 5 driving emerges, this number is expected to surpass 1 billion lines. The growing attack surface demands a proactive cybersecurity strategy to prevent vulnerabilities from being exploited.

Automakers need to implement a multilayered defense strategy that encompasses multiple security measures across the entire ecosystem to build a secure SDV ecosystem. (Source: Adobe Stock) The expanding cybersecurity threat landscape

Unlike their predecessors, SDVs are no longer isolated machines. Instead, they function as interconnected platforms, continuously exchanging data with cloud networks, IoT devices, and other vehicles. While this level of interconnectivity unlocks powerful capabilities, it also increases exposure to cyberthreats.

Without strong encryption and data protection measures, cloud-connected vehicles risk having sensitive driver information compromised. AI-powered personal assistants and autonomous-driving systems must be designed with robust privacy safeguards to prevent unauthorized tracking or manipulation.

Compounding the risk is the lack of standardized security frameworks across the industry. While standardization efforts are advancing, every automaker develops proprietary software and interfaces, leading to inconsistencies in security implementations. These inconsistencies create opportunities for cybercriminals to exploit fragmented security protocols. A single vulnerability in one system could serve as an entry point for attackers to gain access to critical vehicle functions, jeopardizing both data privacy and operational safety.

Supply chain risks also contribute to the security dilemma. Modern vehicles rely on third-party software and hardware providers, each of which may introduce vulnerabilities that adversaries can exploit.

Furthermore, SDVs must support a mix of legacy and cutting-edge systems, making it difficult to implement uniform security measures across all components. The absence of an industry-wide security standard exacerbates these risks, as automakers struggle to balance innovation with the need for strong protections.

This growing digital ecosystem extends beyond the vehicle itself. Automakers now maintain ongoing digital relationships with drivers through software-based subscriptions and AI-powered enhancements, often leveraging mobile apps for remote vehicle control. While these applications provide convenience, allowing users to start their cars, unlock doors, or adjust vehicle settings from anywhere, they also introduce critical security vulnerabilities.

If mobile apps are not properly secured with strong authentication and robust software protections, cybercriminals could exploit weaknesses to hijack these functions, potentially gaining control over vehicles or tracking driver locations in real time.

Mobile apps also store personally identifiable information, such as driver profiles, payment details, and vehicle usage data, making them attractive targets for cybercriminals. This further increases the need for stronger authentication protocols, end-to-end encryption, and strict compliance with privacy regulations such as GDPR and CCPA.

Real-world incidents have already demonstrated the dangers of inadequate security. Just last year, researchers uncovered vulnerabilities in Subaru’s Starlink system that allowed remote attackers to unlock and start millions of vehicles, track their locations, and access extensive driving histories. While Subaru quickly patched the flaw, the incident highlighted the urgent need for automakers to adopt more comprehensive cybersecurity frameworks.

Building a secure SDV ecosystem

Securing SDVs goes beyond simply implementing technical solutions. It requires fostering a robust security culture within organizations, using certified solutions, and relying on independent third-party assessments to ensure compliance with ever-evolving industry standards. A fragmented approach to security can leave dangerous gaps that attackers are quick to exploit.

Security must be integrated from the ground up, beginning at the chip and silicon IP level to prevent hardware-based exploits. Adopting a bottom-up security architecture ensures that every layer, whether it be firmware, software, network communications, or cloud services, remains protected against potential cyberthreats.

To build a truly secure SDV ecosystem, automakers must implement a multilayered defense strategy that encompasses multiple security measures across the entire ecosystem. This strategy starts with hardware-based security, which prevents tampering at the chip level, ensuring that foundational components remain secure. From there, AI-driven threat detection becomes essential, as it enables vehicles to continuously monitor and respond to emerging cyberthreats in real time.

Equally crucial is the establishment of a secure cloud infrastructure. This includes implementing encrypted data storage, strict access controls, and continuous monitoring to safeguard against cloud-targeted attacks. Additionally, OTA updates must be encrypted to ensure that software changes are secure and tamper-proof, thus protecting against potential supply chain attacks.

Finally, securing access to the vehicle itself is paramount. Strong authentication and identity management systems must be in place to ensure that only authorized individuals can interact with critical functions, such as unlocking doors or tracking the vehicle’s location.

Creating a secure SDV ecosystem is a collaborative effort among engineers, security teams, and end users. Automakers must cultivate a security-first culture, ensuring that cybersecurity awareness is ingrained at every level of development. Teams must be trained to anticipate, detect, and respond to threats proactively and effectively.

The road ahead

SDVs represent a paradigm shift in the automotive industry, offering continuous improvements but also introducing security challenges. As AI, automation, and cloud connectivity become integral to modern mobility, cybersecurity will remain a priority for automakers.

Looking ahead, advancements such as quantum computing and the need for quantum-resistant cryptography will further reshape the cybersecurity landscape. To stay ahead of these developments, automakers must proactively strengthen security frameworks, embedding protection at every layer from silicon to software. By taking a proactive approach to cybersecurity, the industry can unlock the full potential of SDVs while ensuring safety, reliability, and trust in the vehicles of the future.

The post The security imperative for software-defined vehicles appeared first on EDN.

Two capsules. Two consequent pickup-pattern options. Three pickup-setting options. What’s not to like (aside, maybe, from the cosmetics)?

In November 2022, EDN published my introductory treatise on standalone microphones. At the time, I mentioned that two examples of the USB-interface Blue (now Logitech) Snowball microphone were (and had for some time been…since late 2007, my email archive informs me!) in my possession, one of them destined for teardown.

I subsequently also acquired two Snowball iCE mics, one of which I took apart, wrote about and EDN published back in May. The Snowball iCE, released a decade (2015) after its original Snowball sibling (2005), is a lower-cost (and -priced) single-capsule condenser variant of the original design, therefore supporting only a cardioid pickup pattern.

I’ve finally gotten around to actualizing the several-year-back initial aspiration to disassemble the original Snowball, with the fruits of my labors detailed today. As usual, I’ll start out with a set of outer box shots, in each case (along with other photos to follow) accompanied by a 0.75″ (19.1 mm) diameter U.S. penny for size comparison purposes.

Brace yourselves: here come the most existing ones of the lot (not).

Build quality upgrades

With that riveting visual intro out of the way, let’s see what’s within. Accessories include a USB-A to USB-B cable, akin to those commonly used with printers, this time microphone-destined.

And a three-legged stand, conceptually similar to—albeit this time more sturdily constructed than—the one included with its more economical Snowball iCE cohort.

Of course, there’s also our stand-disconnected dissection victim. Front.

Left side.

Back: visible is the USB-B male connector, handling both power (input) and digital audio data (output), and the three-position switch alluded to in the subhead. The switch settings reference the following functional options and other implementation nuances:

1. Position 1
   •    Setting: Cardioid (capsule)
   •    Applications: speech, vocals, and podcasting
   •    Picks up sound from the front, ideal for podcasting, game streaming, or recording vocals and instruments
2. Position 2
   •    Setting: Cardioid (capsule) with -10dB pad
   •    Applications: live music and loud sound sources
   •    Reduces mic sensitivity, so loud instruments or vocalists come in crystal clear and distortion free
3. Position 3
   •    Setting: Omnidirectional (capsule)
   •    Applications: conferences, interviews, and environmental recordings
   •    Picks up sound all around the mic, perfect for conference calls or recording a group of musicians

Onward. Right side.

Top, showcasing the pointed-forward power LED.

And bottom, with the vertical-swivel (45° tilt up and down) screw-hole connection to the earlier-seen stand.

Capsule counting

Now to get inside the mic itself. The procedure is exactly the same as for the Snowball iCE, which I’ve already textually and photographically documented in exhaustive detail back in May. So, I’ll back-reference you for the specifics versus doing a repeat performance. The only variance is that the shiny silver ring around the circumference is metal (with an adhesive backing) this time, versus just a sticker (another cost-reduction move that Blue-then-Logitech apparently made with the Snowball iCE).

Remove the black foam sheet from the front half.

And as before, you’ll see the connection to the power LED.

Now for the much more interesting (at least to me) back half.

Completely remove the four screws that originally held the two halves together:

And the guts detach from the back-half housing straightaway.

There’s a hefty metal plate in-between the multi-capsule assembly and the PCB.

See those three screw heads? You know what comes next.

Back in May, I mentioned a competitor-sourced controversy regarding just how many condenser pickup capsules the Snowball contained. But in revisiting the referenced October 2023 prior-coverage source, I realized that I hadn’t yet provided the associated visual evidence. The competitor was another USB-interface dual-pattern mic I’d disassembled, JLab’s Talk GO. And here’s the belated comparative graphic, presumably JLab-sourced, although published at the product page of a retail channel partner, Woot (where I’d bought mine).

I don’t know about you, but this sure looks like two condenser capsules inside the Snowball to me. Agree?

Now for the PCB, beginning with the comparatively boring front side that normally nestles up against the metal plate (but doesn’t actually touch it, which would short out those solder points, thanks to thin white plastic spacers that keep them apart).

Here’s the more intriguing, or at minimum, more populated backside:

You’ll see in a minute where the two grey multi-wire harnesses at top and left end up. You’ve already seen where the yellow-and-white one also at the top goes (the front/top power LED), as well as the two red-and-black ones (the two condenser pickup capsules). But what about the ICs in the middle? I thought you’d never ask.

The Snowball iCE’s dominant audio ADC-plus-USB interface device was C-Media Electronics’ CM6327A. This time it’s Micronas’ UAC 3556B, first publicly discussed more than a quarter century ago (!!!) and curiously positioned as “enabling Voice over Internet Protocol (VoIP) functionality, integrating an additional audio channel directly into existing USB keyboard architectures” (???).

It includes a two-channel ADC, although per the datasheet (PDF), only one of the two channels can optionally act as either an (electret) microphone or line input, with the other only supporting line levels. Presumably, the UAC 3556B also implements back panel switch position #2’s input attenuation function. The IC’s integrated DAC is seemingly unused.

Speaking of the back panel switch, and in closing, there’s this last shot.

Showing, as previously promised and after more black foam removal, where those two grey multi-wire harnesses end up at their other ends. And with that, I’ll wrap up for today. Share your thoughts in the comments, please!

—Brian Dipert is the associate editor, as well as a contributing editor, at EDN.

Related Content

• Microphones: An abundance of options for capturing tones
• The Blue (now Logitech) Snowball iCE: This mic sounds nice
• Checking out a USB microphone
• Microphones: On-PCB options for catching tones
• Disassembling an in-line microphone preamp

The post Blue’s original Snowball: A multi-capsule sonic catch-all appeared first on EDN.

Billion Electric Mobility (BillionE) has partnered with JK Cement to deploy 150 heavy-duty electric trucks across Karnataka, Maharashtra and Goa, making one of the region’s largest deployments of electric trucks for cement logistic. The collaboration began with an initial fleet of 20 electric trucks from JK Cement’s Muddapur plant in Karnataka, with the remaining vehicles planned to be introduced in phases. The partnership represents a significant step in the adoption of battery-electric vehicle for heavy duty transportation. The truck is expected to be deployed in phases by March 2027, according to reports.

This latest deployment by JK Cement is one of the largest deployments of electric trucks in the cement sector in India. The project will help the company gain practical experience in operating heavy-duty electric trucks on high-volume transport routes and in challenging conditions. It will also demonstrate the potential of electric trucks for B2B logistics and commercial freight operations.

The initial fleet will feature Montra Electric’s Rhino 5538, a 55-tonne electric truck. The model will be available in both tipper and tractor-trailer versions, with JK Cement initially deploying the tractor-trailer variant. The truck will be offered in a 4×2 configuration and powered by a 280-kW electric motor and a 282-kWh LFP battery pack. Depending on the variant and operating conditions, it is claimed to offer a range of 198 km or 169 km. The battery can be charged from 20% to 100% in approximately one hour.

The phased deployment by BillionE and JK Cement aims to show that electric trucks can support regular, real-world freight operations at scale, rather than being limited to small pilot projects. By combining high-capacity electric trucks, fast charging, and smart route planning, the project could provide a model for the logistics industry to move towards zero-emission freight transport.

The post Billion Electric, JK Cement Partner to Deploy 150 Heavy-Duty Electric Trucks for Green Freight appeared first on ELE Times.

Now, India is about to move a further step ahead in enhancing its airborne surveillance and monitoring with the development of Airborne Early Warning and Control (AEW&C) Mk II or Netra Mk II. Under the programme, six Airbus A321 aircraft will be converted into sophisticated airborne surveillance aircraft. Reports suggest that DRDO has inked a contract with the aviation giants to get the jets converted as advanced Airborne Early Warning and Control aircraft, as per the Defence Analysis Wing of India’s Defence Ministry.

These new aircraft are supposed to carry advanced electronic warfare systems which are also capable of detecting and tracking aerial targets at high altitudes and from large distances. Equipped with highly capable radars and state-of-the-art electronic sensors, such platforms allow commanders to expand their real-time battlefield awareness and to effectively command coordinated counter-attack actions.

Electronic Age of warfare: “With the production of this aircraft, we would reduce our dependence on imported advanced electronics for such applications and achieve indigenisation”. Said by Mr R.N. Murali, Director. R&D facility, India. With the development of Netra Mark II, electronics will play just as important a role as our traditional weapons. Improved radars, data link, secure radio, processing capability & C2 system. The technology has to be a force for our country.

The programme is poised to enhance India’s indigenous air surveillance capability, enabling it to quickly respond to developing situations, and improving sky surveillance.

The post India Moves Ahead with Netra Mk II: Six Airbus A321s to Become Advanced Airborne Surveillance Platforms appeared first on ELE Times.