Українською
  In English
Feed aggregator
EEVblog 1784 - Claude Code Reverse Engineer 121GW Firmware SUCCESS!
💛 Вебінар "Від ідеї до інституційної практики: як інтегрувати Citizen Science в дослідницьку діяльність університету"
Бібліотека КПІ запрошує дослідників КПІ ім. Ігоря Сікорського та усіх охочих долучитися до вебінару «Від ідеї до інституційної практики: як інтегрувати Citizen Science в дослідницьку діяльність університету».
⭐ Студентська конференція та конкурс студентських наукових робіт з англійської мови “Advances in Science and Technology"
Запрошуємо взяти участь у Міжнародному конкурсі студентських наукових робіт «Досягнення в науці та техніці» та онлайн-конференції з досліджень та розробок, що є унікальною можливістю дослідити передові дослідження та запропонувати інноваційні рішення глобальних проблем. Це ваш шанс продемонструвати свої навички, розширити свої знання та вплинути на майбутнє науки і техніки.
Marvell to acquire Lumentum for $115bn, expanding total addressable market to $550bn
Cardiff and Swansea universities sign MoU to explore developing UK compound semiconductor pilot foundry capabilities
Blue Laser Fusion raises $34m in private placement
Енергетична освіта, профорієнтація молоді та залучення експертів КПІ до галузевих проєктів
КПІ ім. Ігоря Сікорського відвідали представники Української енергетичної ініціативи Глобального договору ООН в Україні на чолі з керівницею Наталією Хмельовською.
FLIP fluid simulator on a flip-dot display: Mitxela’s project
An electromechanical flip-dot display can become the surface of a real-time fluid simulator. That is what Tim Alex Jacobs, known online as Mitxela, did with a 13 by 28 dot panel. Every physical pixel flips according to the output of the FLIP simulation engine, and the fluid motion is controlled by a joystick that adjusts the direction of gravity. The flipping of the dots produces an audible sound, so the mechanical noise becomes part of the effect.
The software core is the two-dimensional FLIP fluid simulator by Matthias Muller. Jacobs had already used it two years earlier for a wearable LED pendant that imitated mercury under a sheet of glass. A flip-dot display is a form of dot-matrix bitmap in which physical indicators are flipped to show a dark or a light side. From a distance it forms a one-bit, single-colour image. Flip-dots also draw power only when they change state, which is why they are often used in public transport signage.
Custom driver circuitry and 50 ampere peaksJacobs replaced the original driver circuitry with a custom design, able to flip the dots faster for smoother motion. He also cut the boards to size so they could be placed side by side without seams. The high current demanded by the simultaneous flipping of the dots, up to about 50 amperes, is supplied by many small electrolytic capacitors scattered across the board. The display handles about 40 frames per second.
The high current demanded by the simultaneous flipping of the dots is supplied by many small capacitors spread across the board.
The simulation input comes from a joystick that adjusts the direction of gravity to make the fluid move. In a hidden mode, an integrated inertial measurement unit lets you tilt the whole display to pour the fluid from one side to the other. The firmware runs on a Raspberry Pi Pico 2 W and on a ch32v003, with Python scripts to show test patterns and video through a USB-RS485 adapter.
Numbers, costs and what you need to rebuild itThe flip-dot panel has a resolution of 13 by 28. The full driver panels handle 13×8, while the ones at the ends are reduced to 13×4. The total cost of the large panel, excluding donor parts and Jacobs’s time, was under 500 pounds. Anyone who wants to rebuild it will find the firmware for the ch32, the Python scripts and the FLIP simulator in the Mitxela repository.
- Raspberry Pi Pico 2 W for running the simulation
- ch32v003 for the decode-sw firmware
- USB-RS485 adapter for the Python scripts
- Hanover flip-dot display 13×28
- Shift register for driving the dots
- Electrolytic capacitors for the current peaks
- Joystick for adjusting gravity
- Inertial measurement unit for the hidden mode
To send test patterns and video from a computer to the display you need a USB-RS485 adapter: a USB-RS485 converter does the same job.
Source: https://github.com/mitxela/flipdots
Related productsThe post FLIP fluid simulator on a flip-dot display: Mitxela’s project appeared first on Open Electronics.
Disassembling a SFP Ethernet adapter

If you need a spare RJ45 switch port but the built-in ones are all in use, don’t sweat it if you’ve got a spare SFP instead. Ethernet adapters can’t be beat, but (speaking of sweat) mind the heat.
My mid-September initial tutorial on small form-factor pluggable (SFP) modules covered their traditional interfaces to fiber optic cables, with subsequent single- and multimode module teardowns following in short order. It also looked at adapters enabling interface between a SFP cage and conventional Ethernet cabling.
Here’s an example adapter image from that post.

And here’s the relevant associated prose, with bolded emphasis for today’s thematic purposes:
RJ-45 modules mate the SFP or SFP+ circuitry to an Ethernet transceiver. Speeds up to 10 GbE, such as with the module shown at the top of this section, are widely available. These modules tend to run “hotter” than fiber optical or basic wire alternatives, all other factors being equal.
I also touched on the incremental heat dissipation of a module containing a SerDes-interfacing Ethernet transceiver versus one that more simply mates to an optical transmitter-plus-receiver combo (apparently in spite of the fact that the latter includes a laser) within a subsequent blog post that discussed the migration to multi-Gbit Ethernet equipment.
I’ve also seen some online commentary suggestive of high operating temperatures and associated questionable long-term reliability, particularly of the devices’ SFP+ subsystems [and double-particularly in conjunction with the use of SFP+ Ethernet adapters, I’ll add in arrears]. To at least some degree, this discussion is likely reflective of the switches’ fan-less designs.
And just last weekend I stumbled across another case study example of the high-temperature trend. I was reading up on reviews of USB- and Thunderbolt-to-Ethernet adapters, specifically various units from QNAP, both for further conceptual research purposes and in preparation for my own LAN migration plans. QNAP’s latest-generation adapters mate USB4 and Thunderbolt 4 to either 10G SFP+ or 10 GbE (and in both single-and dual-port forms); the prior-gen adapters I happened to be perusing at the time, the QNA-T310G1S (10G SFP+) and QNA-T310G1T (10 GbE), were Thunderbolt 3-based and single-port only.
Here are stock shots of both in sequential order.


Specifically, the reviews I was reading were from ServeTheHome and NASCompares; both conveniently included teardowns. But as I scrolled through them, I was initially confused. The text and pictures in the ServeTheHome piece both trumpeted a device that notably relied solely on only a passive heatsink, while those in NASCompares’ writeup highlighted a device containing a more sizeable heat plate accompanied by an attached active fan.


Match up the image to the associated color scheme (not to mention external port), however, and the seeming discrepancy will clear up in short order. ServeTheHome disassembled the 10G SFP+ version of the product family, whereas NASCompares went with the 10 GbE adapter.
Spec divergenceWith the QNAP devices as a representative case study, I’d therefore expect to see some further thermal dissipation assistance within today’s Ethernet-augmented dissection patient as compared to its optical-only predecessors—no room for a dedicated heatsink, presumably, nor even more certainly for a fan, but presumably at least some thermal paste and/or padding. But a further surprise awaited me even before I got inside.
Here’s the stock shot of what I thought I’d bought, as usual from Amazon’s Resale (formerly Warehouse) used-goods section: an Ipolex ASF-GE-T 10/100/1000BASE-T copper SFP to RJ45 transceiver with auto-negotiation support.

What Amazon shipped me instead, I learned, was the Ipolex ASF-2G-T. Although I didn’t realize this until it was in front of me, still in beat-up packaging, ready for teardown (not to mention beyond the retailer’s 30-day return “window”). As usual, it’s accompanied in the following photos (as well as other to follow) by a 0.75″ (19.1 mm) diameter U.S. penny for size comparison purposes.



My immediate deduction, as I’d unfortunately encountered no shortage of times before, was that someone had purchased a new Ipolex ASF-GE-T, swapped it for an ASF-2G-T already in their possession (still functional or not, not to mention authentic or not…who knows?) and returned the doppelgänger for full refund, with Amazon none the wiser as to the subterfuge it’d been the victim of…not to mention me, who’d then bought the stand-in. That said, while I likely still could have gotten my money back if I complained strongly enough, I didn’t much care in this instance. It had only cost me $8.50, and I was going to destructively (presumably) disassemble it anyway.
But bigger picture, why would someone even exchange a 2.5GbE ASF-2G-T for a 1 GbE ASF-GE-T? At first glance, the stand-in (assuming it’s still working, that is) is the seemingly superior option, at least from a bandwidth standpoint. My working theory neatly exemplifies a broader caution I’d already planned on passing along regarding adapters like these.
The Ipolex ASF-2G-T is no longer even listed on the supplier’s website, or anywhere elsewhere on the Internet (save for, maybe, the Internet Archive), for the matter—at least I wasn’t able to find it (let me know if you have better luck). But a more general Google search on the term “ASF-2G-T” reveals it’s still available for purchase from 10Gtek, an Iponex competitor.
Look closely at the specs and you’ll see that “2.5G” is the only data rate listed for 10Gtek’s version (and presumably also the Ipolex version) of the ASF-2G-T. In contrast, a different variant, the ASF-2G2-T, supports both 1G and 2.5G data rates. And the ASF-GE-T I thought I’d bought? It’s, again, a multi-rate “10/100/1000BASE-T copper SFP to RJ45 transceiver with auto-negotiation support”.
When evaluating SFP Ethernet adapters, keep in mind that they don’t necessarily support multiple possible data rates, for compatibility with whatever’s connected to the other end of the Ethernet cable, far from offering auto-negotiation handshaking capabilities (versus manual configuration, which necessitates the use of a managed switch).
Retention implementation deviationBefore trying to figure out how to get underneath the Ethernet adapter’s metal enclosure, I’ll first share the rest of the exterior shots.
Right side, as before with “right” referencing its orientation when inserted in a network switch or other gear’s SFP port.

Bottom. As before, note the retaining pin, although this time it’s not retractable.

Instead, in this case, rotating the “lock” mechanism lever in the front of the module moves a “ramp” into position adjacent to the pin, enabling you to then slide the module out of the cage.


Left side.

Back to the RJ45 connector for the more traditional right-side-up and upside-down views.


And the same goes for the SFP connector on the other end.


Now to get inside. First step; peel away the topside sticker and see if there’s a screw head underneath. Nope.


Past modules had small inward-bent pins on the sides that, when coaxed back out of the enclosure, enabled the two halves to then slide apart. This time, the “extra” metal pieces were more sizeable and looked more like cage-retention “springs”, but I tried anyway. Again, nope.

Finally, giving the assemblage one final frustrated look-over, I belated noticed two small retention pins alongside the SFP connector.

Like the rest of the case, they were made of sturdy stuff, but I eventually “sprung” them both.
As prognosticated beforehand, there’s the thermal pad. The first of several? Hold that thought.
It originally covered both ICs on the right half of the PCB topside, as the slight indent matching the shape of IC U7 reveals. The plastic shell surrounding the SMD-packaged LAN transformer on the PCB’s left side got mangled by yours truly while wrenching the topside metal piece away.
Now how to get the PCB the rest of the way out? First remove the lock mechanism, mebbe?



Bingo (top view of the PCB extraction process first, then bottom).


Leaving behind yet another, smaller thermal pad.

Let’s look again at the comparatively boring RJ45 and SFP ends first, first right side up and then upside down in both cases.




Now for the perspectives you all really care about. This (top) side you’ve previously sorta-seen already, in encumbered-by-assembly form.
The LAN transformer is the AE-SE24203 from Apps Electronics. To its right (I hope you’ll take my word for it given the faint markings) is the primary thermal pad rationalization, Motorcomm’s YT8821C single-port, 2.5 GbE physical layer (PHY) transceiver. And to its right, past the inductor intermediary, is the aforementioned U7, in a diminutive five-lead package (which always leads me to suspect a dual-transistor structure inside) and faintly mixed-case labeled as follows (readers?):
JWQZY
4y6eE
Now for the other side (both flipped and rotated; note that the RJ45 is now on the right).
Passives dominate the landscape this time. At far left is a three-lead (single transistor?) packaged device labeled as follows (with the last digit 90° rotated versus the others).
P5S4
To its right is the much larger IC originally with the smaller thermal pad atop it and labeled as follows (first three lines):
F330GB
F107079
PJ2423
Those three lines’ worth of characters weren’t in and of themselves terribly helpful from a Google search standpoint, but the last line was more enlightening (at least in theory):
GD ARM
My suspicion is that the first two characters reference the vendor GigaDevice, with the other three indicating an Arm architecture SoC, and that we’re therefore looking at a GD32F330-family offering based on the Cortex-M4 and containing up to up 128 Kbytes of flash memory and 16 KBytes of SRAM, along with a host of peripherals. The family is spec’d to run up to 84 MHz but, considering the 25 MHz crystal further to the right, is seemingly underclocked to its peak potential. Thermal management, don’cha know.
That’s all I have for you today, folks. As always, sound off with your thoughts in the comments!
—Brian Dipert is the associate editor, as well as a contributing editor, at EDN.
Related Content
- SFP: Add-in module delivers diminutive performance and flexibility
- SFP: The single-mode module autopsy
- SFP: The multimode module autopsy
- The multi-gig Ethernet migration: Motivations and implementations
- Design considerations in high-speed fiber networks
The post Disassembling a SFP Ethernet adapter appeared first on EDN.
Енергомоніторинг гуртожитків КПІ ім. Ігоря Сікорського
Пропонуємо вашій увазі публічний дашборд Гуртожитки КПІ ім. Ігоря Сікорського: показники енергомоніторингу та візуалізація даних.
STMicroelectronics Introduces Automotive Safety Combination Sensors for Mass-Market Applications
STMicroelectronics has announced a set of automotive sensors that enable vehicle brands to extend advanced safety and driver-assistance features across categories from premium to mass-market, broadening access to state-of-the-art protection.
Combining multi-axis accelerometers and gyroscopes (angular rate sensors) in a single package, ST’s new sensors offer a unified platform for OEMs and Tier-1 suppliers to build active and passive safety systems that meet stringent automotive quality, reliability, and safety requirements. The devices address use-cases ranging from crash protection, rollover detection, and airbag deployment to vehicle stability controls and radar beam stabilization.
These are the first products launched in the mass market following ST’s acquisition of the NXP automotive and industrial MEMS sensors business in early 2026, a move completed to expand its own MEMS sensors capabilities. ST’s experience in automotive sensing reflects its commitment to guaranteeing product availability for at least 15 years, allowing companies to minimize lifecycle and redesign risks while investing confidently in new programs.
“As a cohesive sensor set suited to multiple safety functions, these devices simplify system architecture, accelerate development, and increase flexibility to scale features and performance,” said Simone Ferri, Executive Vice President, MEMS Sub-Group, STMicroelectronics. “Strengthened by our longevity commitment and global support infrastructure, these are the first automotive safety combination sensors ready for mass-market deployment, accelerating the move to active safety.”
Omdia has commented on the market opportunities for inertial sensing in Advanced Driver Assistance Systems (ADAS). Nora Houlihan, Senior Research Analyst at Omdia, said, “Thanks to ADAS, inertial measurement units (IMUs) are expected to grow at 17.7% CAGR (2025-30). As automotive manufacturers approach higher levels of autonomy there will be a significant increase in IMU-powered MEMS sensors for acceleration and motion detection.”
Automotive Combination Sensors from STMicroelectronics: Technical InformationST’s combination sensors integrate a multi-axis accelerometer and gyroscope in a single ISO 26262 compliant device with full internal diagnostics. All sensors support SafeSPI, the standard serial peripheral interface for automotive safety, that enables independent monitoring of sensor data.
The new sensors comprise:
- NCS1012BAEP, with z-axis (yaw) angular rate sensor and xy low g acceleration sensor.
- NCS1012CAEP, with x-axis (roll) angular rate sensor and yz low g acceleration sensor.
- NCS1012EAEP, with x-axis (roll) angular rate sensor and xy medium g acceleration sensor.
- NCS10135AEP with z-axis (yaw) angular rate sensor and xyz low g acceleration sensor.
The integrated angular rate sensors have a full-scale range of ±125 dps, ±250 dps or ±350 dps and feature low offset with minimal drift over the automotive temperature range (−40°C to +105°C). A low-pass filter is integrated, with 3dB frequency options of 12.5Hz to 400Hz, as well as an optional single-pole high-pass filter with fast startup.
The low g acceleration sensors feature a nominal full-scale range from ±1.50 g to ±34 g, while the medium g acceleration sensors have nominal full-scale range from ±15.5 g to ±150 g. These feature an independent signal chain to minimize noise, low offset with low drift over the automotive temperature range, and an integrated low-pass filter. The four new sensors are in production now, in 24-pin QFN 6mm x 6mm x 1.90mm packages, with wettable flanks meeting automotive-industry optical inspection compatibility requirements.
The post STMicroelectronics Introduces Automotive Safety Combination Sensors for Mass-Market Applications appeared first on ELE Times.
Aratas Corporation: A New Era for OMRON Components
Aratas Corporation, headquartered in Kyoto, Japan, began operations today with a new management structure, following completion of the planned share transfer. Led by President and CEO Masahiko Ezaki, Aratas was established on 1 July 2026 through the spin-off of OMRON‘s Device & Module Solutions (DMS) business. It now operates within a strategic partnership with Carlyle.
A new chapter for OMRON electronic componentsFor European customers, Aratas combines reliability and innovation. It carries forward more than 90 years of OMRON tradition, including decades of Japanese excellence in design and manufacturing, proven product reliability and supply chain security. The established European team remains in place, preserving product expertise, customer support, local presence and distributor relationships. Thanks to its specific focus on switching, connection and sensing technologies, Aratas can respond more quickly to evolving customer needs and better align development and investment with their priorities.
The Aratas headquarters, the new company created on 1 July 2026 from the spin-off of OMRON’s Device & Module Solutions business.
The Aratas portfolio of relays, switches, connectors and sensors supports the safe and reliable operation of mission-critical systems through power switching, control, connectivity and sensing functions. The global growth strategy focuses on markets such as energy management, mobility, digital infrastructure and smart automation. Beyond its established business, Aratas will explore medium- to long-term opportunities in sectors such as medical, aviation and space, where new societal needs could create new applications for its technologies.
Focus on EuropeIn Europe, Aratas is pursuing this strategy by focusing on key areas such as high-power electrification, grid-scale energy storage and high-frequency domain testing, including automated test equipment (ATE) for semiconductors. The company combines product expertise, regional support and supply security to help original equipment manufacturers (OEMs), electronics manufacturing services (EMS) providers, distributors and other customers move faster from system design to qualification and production.
Statement from José Luis González del Val«European manufacturers must reconcile shorter development cycles with stricter regulations, growing sustainability requirements and greater supply chain risks», said José Luis González del Val, Chief Operating Officer of Aratas Europe. «Component performance is only part of the answer. Supply continuity, verifiable product data and practical support for certification and qualification are just as important. The transition to Aratas carries this guarantee forward while adding greater focus and agility. Together, these strengths are essential to achieving our ambition of becoming the partner of choice wherever component selection directly affects system performance, risk control and business results.»
The meaning of the name AratasThe name Aratas combines two Japanese words meaning «new» and «tomorrow» and reflects the company’s mission to foster innovative connections between people and technology to create a new tomorrow. The values Aspire, Agile and Ahead define how the company will pursue this mission, while the motto Always New, Always Electric expresses its forward-looking orientation.
For more information, visit Aratas.com.
The post Aratas Corporation: A New Era for OMRON Components appeared first on Open Electronics.
Smartphone shipments fall 20% year-on-year in Q3, the lowest third-quarter total since 2013
NUBURU regains compliance with NYSE American continued listing standards
Pocket Pico: a terminal node controller for amateur packet radio
The Pocket Pico is a terminal node controller for amateur packet radio, a modern rebuild of the Heathkit HK-21 Pocket Packet. Inside sits a Raspberry Pi Pico, and the firmware is the same as the original machine’s. So anyone who builds one steps into packet radio with current hardware, yet keeps compatibility with historic software.
The project is by btech. Anyone who wants to rebuild it will find the full write-up on the project page on btech’s site, with the design choices and the construction details.
A Z80 emulator inside the Raspberry Pi PicoThe trick is emulation. The Raspberry Pi Pico runs a Z80 processor emulator, and that lets it run the original Heathkit HK-21 firmware. Instead of rewriting the terminal node controller logic from scratch, the project reuses code that already worked forty years ago.
The microcontroller does not limit itself to playing the part of the CPU. It also handles modulating and demodulating the Bell 202 audio tones, so no dedicated modem chip is needed. The transmission speed of the Bell 202 tones is 1200 baud.
- Raspberry Pi Pico as the only control board
- Z80 processor emulator to run the HK-21 firmware
- Bell 202 tone modulation and demodulation at 1200 baud with no dedicated modem chip
- APRS and AX.25 Level 2 handled by the firmware
- Built-in Personal Bulletin Board System for messages from other stations
On the radio side the device handles APRS and AX.25 Level 2. It also includes a built-in Personal Bulletin Board System, meaning it lets other stations leave messages on your own. That is the feature that, in the original HK-21, made the Pocket Packet a real node and not just an interface.
Thanks to using the same firmware as the HK-21, the Pocket Pico stays compatible with a lot of dated packet radio software. So anyone with old packet programs at home does not have to start over.
What you need to rebuild the Pocket PicoThe shopping list is short. You need a Raspberry Pi Pico, the original Heathkit HK-21 firmware and the Z80 processor emulator. Then you need the audio connection to the radio, which is the part where the build needs the most care.
The Pico acts as emulated CPU and modem together, so there are no other chips to solder for the modulation side. This reduces the failure points and simplifies the board. However, setting the audio levels to the transceiver remains the critical step: if the tones come in too strong or too weak, the 1200 baud demodulator will not lock on.
The project also has a video, so anyone who prefers to see the machine working before soldering will find the footage shot by btech. In short: a Pico, a 1983 firmware and a bit of care with the audio are enough to get into amateur packet radio with a modern node.
Source: https://n7wdz.com/project-pocket-pico-tnc.html
The post Pocket Pico: a terminal node controller for amateur packet radio appeared first on Open Electronics.
🎥 Обговорення ключових питань розвитку вищої освіти
КПІ ім. Ігоря Сікорського став майданчиком для зустрічі керівництва Міністерства освіти і науки України на чолі з міністром Андрієм Бутенком із ректорами університетів та представниками їхніх об’єднань, зокрема Спілки ректорів закладів вищої освіти України.
КПІ виборов срібло XXI Універсіади міста Києва 2025/2026
📈 За підсумками річного спортивного марафону серед ЗВО столиці команда КПІ набрала 3 399 очок і посіла друге місце у III категорії.
Енергоефективність у медицині: новий напрям співпраці КПІ та CUAM
КПІ ім. Ігоря Сікорського відвідала делегація італійської міжнародної організації «Лікарі з Африкою CUAMM» (Doctors with Africa CUAMM), яка працює в Україні через відокремлений підрозділ «Опера С. Франческо Саверіо Україна».
Rohde & Schwarz’s MXO AI Connect: AI-assisted Intelligence for Oscilloscope Workflows
Rohde & Schwarz connects AI assistants to its MXO oscilloscopes through MXO AI Connect. The new software adds natural language interaction, instrument-specific guidance and automation support to oscilloscope workflows in the engineer’s preferred AI environment. With the new MXO AI Connect, Rohde & Schwarz brings AI-assisted instrument intelligence to its MXO oscilloscopes. Engineers can use natural language to describe a task, while the connected AI assistant draws on instrument-specific knowledge to map that request to oscilloscope functions and actions.
Modern test environments combine complex measurements, broad instrument functionality and growing automation requirements. MXO AI Connect links the reasoning capabilities of the user’s chosen AI model with trusted, instrument-specific knowledge from Rohde & Schwarz. This helps the assistant understand the user’s intent, determine how a requested task can be carried out on the oscilloscope and interact with the connected instrument. In this way, the software extends the instrument workflow beyond remote control by combining natural language interaction, technical knowledge and execution.
MXO AI Connect supports all models of the MXO 3, MXO 4, MXO 5 and MXO 5C oscilloscope series, and R&S ScopeStudio. It is a locally installed Model Context Protocol (MCP) server that runs on a user’s PC or on a shared lab host. No additional software is required on the instrument. Engineers can choose their preferred AI client such as Cursor, Claude Desktop, Claude Code and GitHub Copilot, along with their preferred large language model and data handling policy.
The server provides access to model-specific MXO help content and communicates with the instrument through standard VISA connections such as HiSLIP, VXI-11 or TCP/IP, keeping instrument communication within the local environment. Front-panel operation remains available while the AI assistant is connected.
Typical AI-assisted Workflows with MXO AI ConnectUnderstanding: Engineers can bring instrument-specific knowledge, documentation and application guidance directly into their workflow to support learning and day-to-day work with the oscilloscope.
Configuration: Natural language requests can be translated into the appropriate instrument functions, settings and automation approaches, which can reduce setup and implementation effort and limit the need to search through documentation or coding examples manually.
Analysis: The reasoning and data processing capabilities of modern AI models can support the review of measurement results, the identification of waveform characteristics and the assessment of relationships or behaviour in the data.
Automation: For more complex tasks, AI agents can coordinate instrument control, analysis methods and software automation across broader test workflows, with repeated adjustments to setups and code until the intended measurement objective is reached.
Philip Diegmann, Vice President Digital & Power Test Solutions at Rohde & Schwarz, says: “AI offers engineers a new way to work with increasingly capable test instruments. With MXO AI Connect, they can move more quickly from a measurement task to the right instrument setup and from there to analysis and automation. This makes it easier to work with complex instrument functions and integrate them into broader test workflows.”
The post Rohde & Schwarz’s MXO AI Connect: AI-assisted Intelligence for Oscilloscope Workflows appeared first on ELE Times.
MicroVision Collaborates with FieldAI to Deploy Next-Generation Autonomous Capabilities
MicroVision has announced an expanded collaboration with FieldAI, a developer of autonomous robotic systems for government and industrial applications. The collaboration builds on successful testing of MicroVision’s perception technologies by FieldAI’s Federal team, including evaluation of the IRIS long-range lidar sensor on autonomous ground vehicles and demonstrations of MicroVision’s extended perception solution.
The partnership combines the Robinson Unmanned Spirit drone platform with the MOVIA Air Plus sensor for real-time, colorized 3D lidar mapping integrated with ATAK. In addition, FieldAI has purchased MicroVision MOVIA sensors for development and evaluation activities spanning both government and industrial autonomous robotics initiatives.
MicroVision & FieldAI: Advancing Autonomous Capabilities“FieldAI is pioneering autonomous systems designed for some of the most demanding operational environments, and we’re excited to continue expanding our collaboration across both their Federal and Industrial organizations,” said Glen DeVos, CEO of MicroVision. “From long-range perception for autonomous ground vehicles to real-time 3D mapping and short-range obstacle detection, our portfolio provides the flexibility and performance required to support next-generation robotic systems. We look forward to supporting FieldAI as they continue advancing autonomy across commercial and government applications.”
“The performance and versatility of MicroVision’s sensing technologies have made them an important collaborator as we continue advancing autonomous capabilities across our platform portfolio,” said Shehryar Khattak, Director of Technology at FieldAI. “Following successful tests across uncrewed ground and aerial systems, we are expanding our evaluation efforts to identify opportunities for broader adoption of MicroVision’s perception solutions across both our Federal and Industrial programs.”
The collaboration reflects growing demand for advanced perception solutions capable of supporting autonomous mobility, navigation, mapping, obstacle detection, and mission execution across government and industrial robotic platforms. By combining MicroVision’s portfolio of long-range, short-range, and aerial perception solutions with FieldAI’s autonomy software and robotic systems expertise, the companies are exploring opportunities to accelerate the deployment of next-generation autonomous capabilities in challenging operational environments.
The post MicroVision Collaborates with FieldAI to Deploy Next-Generation Autonomous Capabilities appeared first on ELE Times.








